Bedienungsanleitung Yamaha CLP-411 (Seite 49 von 56) (Französisch)

590692

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

(5) XG Native Bulk Data (reception only)

Data format: [F0H] -> [43H] -> [0nH] -> [4CH] -> [aa] ->

[bb] -> [hh] -> [mm] -> [ll] -> [dd] ->...-> [cc]

-> [F7H]

F0 Exclusive status

43 YAMAHA ID

0n When n is received n=0~F, whichever is received.

When n is transmitted n always=0.

4C Model ID of XG

aa ByteCount

bb ByteCount

hh Address High

mm Address Mid

ll Address Low

dd Data

| |

cc Check sum

F7 End of Exclusive

For information about “Address” and “Byte Count” fields, refer to

attached tables.

In the attached tables “TOTAL SIZE” partitions a data series into

single bulk dumps. The “address” is the first byte of the bulk data.

The checksum value is set such that the sum of Byte Count, Ad-

dress, Data, and Checksum has value zero in its seven least

significant bits.

If too much bulk data is received at a time there is a chance of

error. The total data for a bulk dump should not exceed 512 bytes,

it is recommended that data be kept under 512 bytes with an

interval time of 120msec or more between 512 byte bulk.

(6) Clavinova MIDI Format

Data format: [F0H] -> [43H] -> [73H] -> [3BH] -> [yy] ->

[F7H]

F0 = Exclusive status

43H = Yamaha ID

73H = Clavinova ID

3BH = CLP-411/511 ID

yy = Substatus

yy Information

02H Internal MIDI clock

03H External MIDI clock

06H Bulk Data

* The bulk data follows 06H.

* When yy=2, 3 or Clavinova common ID (01H) is recog-

nized

as well as 3BH.

BULK DUMP FORMAT

F0H, 43H, 73H

nnH (Product ID: CLP-411=42H,

CLP-511=43H)

06H (Bulk ID)

05H (Sequence data, Bulk Dump Format)

0xH, 0xH, 0xH, 0xH (Data length= xxxx bytes)

[BULK DATA] (low, high........low, high)

[CHECK SUM (1byte)] = 0-sum (BULK DATA)

F7H

(7) Special Control

Data format: [F0H] -> [43H] -> [73H] -> [3BH] -> [11H] ->

[0nH] -> [cc] -> [vv] -> [F7H]

43H = Yamaha ID

73H = Clavinova ID

3BH = CLP-411/511 ID

11H = Clavinova special control

0nH = Control MIDI change + channel number

cc = Control number

vv = Value

Control 0nH ccH dd

Split Point Always 00 14H 14H :

Split Key Number

(CLP-511)

Metronome Always 00 1BH 00H : off

01H : –

02H : 2/4

03H : 3/4

04H : 4/4

05H : 5/4

06H : 6/4

07H : No accent

Channel Detune ch: 00-0F 43H 00H-7FH

Voice Reserve ch: 00-0F 45H 00H : Reserve off

7FH : on

*1 When Volume, Expression is received for Reserve On, they will be

effective from the next Key On. Reserve Off is normal.

(8) Others

Data format: [F0H] -> [43H] -> [1nH] -> [27H] -> [30H] ->

[00H] -> [00H] -> [mmH] -> [llH] -> [ccH] -> [F7H]

Master Tuning (XG and last message priority) simultaneously changes the

pitch of all channels.

F0H = Exclusive Status

43H = Yamaha ID

1nH = Transmission from n=CLP is always 0. 0-F is received.

27H = Model ID of TG100

30H = Sub ID

00H =

mmH = Master Tune MSB

llH = Master Tune LSB

ccH = don’t care (under 7FH)

F7H = End of Exclusive

MIDI Data Format/MIDI-Datenformat/Format des données MIDI/Formato de datos MIDI

MIDI Parameter Change table ( SYSTEM )

Address (H) Size (H) Data (H) Parameter Description Default value (H)

00 00 00 4

020C - 05F4(*1)

MASTER TUNE -50 - +50[cent] 00 04 00 00

01 1st bit 3 - 0 → bit 15 - 12 400

02 2nd bit 3 - 0 → bit 11 - 8

03 3rd bit 3 - 0 → bit 7 - 4

4th bit 3 - 0 → bit 3 - 0

04 1 00 - 7F MASTER VOLUME 0 - 127 7F

05 1 — —

06 1 34 - 4C(*2) TRANSPOSE -12 - +12[semitones] 40

7E 00 XG SYSTEM ON 00=XG sytem ON

7F 00 RESET ALL PARAMETERS 00=ON (receive only)

TOTAL SIZE 07

*1: Values lower than 020CH select -50 cents. Values higher than 05F4H select +50 cents.

*2: Values from 28 through 33 are interpreted as -12 through -1. Values from 4D through 58 are interpreted as +1 through +12.

MIDI Parameter Change table ( EFFECT 1)

Refer to the “Effect MIDI Map” for a complete list of Reverb, Chorus and Variation type numbers.

Address (H) Size (H) Data (H) Parameter Description Default value (H)

02 01 00 2 00-7F REVERB TYPE MSB Refer to Effect MIDI Map 01(=HALL1)

00-7F REVERB TYPE LSB 00 : basic type 00

0C 1 00-7F REVERB RETURN -∞dB...0dB...+6dB(0...64...127) 40

TOTAL SIZE 0E

02 01 40 2 00-7F VARIATION TYPE MSB Refer to Effect MIDI Map 00(=Effect off)

00-7F VARIATION TYPE LSB 00 : basic type 00

TOTAL SIZE 21

* “VARIATION” refers to the EFFECT on the panel.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-411 Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-411

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info