590705
62
Zoom out
Zoom in
Vorherige Seite
1/96
Nächste Seite
62
Appendix
Message List
Appendix
Message List
To turn off the message, press the [-/NO] button.
Message Meaning
CLr Initializing the instrument to the default setting.
NOTICE
Do not turn off the power of the instrument when “CLr” appears in the display. Doing so may delete all Song data in the
instrument, including external Songs (page 29).
con Displayed when Musicsoft Downloader is started on a computer connected to the instrument. When this message
appears, you cannot operate the instrument.
E01 Displayed when the character code (
page 60) is not appropriate for the file name of the Song which you are
selecting. Switch the character code.
Displayed when the data format is not compatible with this instrument, or the data has some other problems. This
Song cannot be selected.
Displayed when no USB storage devices can be found, or a problem has occurred in the USB storage device.
Disconnect and connect the device again, then execute the operation. If this message appears repeatedly even
when there aren't any other likely problems, the USB storage device may be damaged.
Displayed when the backup data cannot be loaded. There is no backup data which can be loaded, or the data may
be damaged.
E02 Indicates that the USB storage device or media is protected.
E03 Displayed when the memory of the USB storage device becomes full, or the number of files and folders exceeds the
system limit.
E04 Displayed when conversion to audio, Audio Song playback or recording has failed. If you are using a USB storage
device to which data has already been stored or deleted a number of times, first make sure that the device does not
contain important data, then format it (
page 44) and connect to the instrument again.
EEE A malfunction has occurred in the instrument. Contact your nearest Yamaha dealer or authorized distributor.
End Displayed when the current operation is completed.
Enp The memory of the instrument or the USB storage device is running out. We recommend that you remove any
unnecessary files (
pages 37, 43) to ensure sufficient memory capacity before start recording.
FCL Indicates that internal memory is being cleaned up. Panel settings, recorded Songs and external Songs which have
been stored to the USER MIDI drive are being cleared, because the power has been turned off before the Save,
Load or Convert operations were completed.
NOTICE
Do not turn off the power of the instrument when “FCL” appears in the display.
For Indicates that the instrument is going to call up the Format operation for the USB storage device.
FUL Since the memory of the instrument or the USB storage device is insufficient, the operation could not be completed.
If this message appears during recording, the performance data may not be recorded properly.
n y Confirms whether each operation is executed or not.
n
y
Reconfirms whether the overwriting, delete or format operation is executed or not.
Pro Displayed when you try to overwrite or delete a protected Song or read-only file. Use a read-only file after cancelling
the read-only setting.
StP Displayed when you canceled conversion to audio.
UnF Displayed when an unformatted USB storage device is connected. First make sure that the device does not contain
important data, then format it (
page 44).
Uoc Communication with the USB device has been shut down because of overcurrent to the USB device. Disconnect the
device from the [USB TO DEVICE] terminal, then turn on the power of the instrument again.
UU1 Communication with the USB device has failed. Remove the USB device and make the connection again. If the
message appears even when the USB device is connected properly, the device may be damaged.
UU2 This USB device is not supported on this instrument, or too many USB devices may have been connected. Refer to
“Connecting a USB storage device” (
page 47) for information on the USB device connection.
62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yamaha CLP-440PE wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Yamaha CLP-440PE

Yamaha CLP-440PE Bedienungsanleitung - Deutsch - 95 seiten

Yamaha CLP-440PE Bedienungsanleitung - Deutsch - 14 seiten

Yamaha CLP-440PE Bedienungsanleitung - Englisch - 7 seiten

Yamaha CLP-440PE Bedienungsanleitung - Englisch - 4 seiten

Yamaha CLP-440PE Bedienungsanleitung - Englisch - 14 seiten

Yamaha CLP-440PE Bedienungsanleitung - Holländisch - 95 seiten

Yamaha CLP-440PE Bedienungsanleitung - Dänisch - 95 seiten

Yamaha CLP-440PE Bedienungsanleitung - Französisch - 96 seiten

Yamaha CLP-440PE Bedienungsanleitung - Französisch - 14 seiten

Yamaha CLP-440PE Bedienungsanleitung - Italienisch - 96 seiten

Yamaha CLP-440PE Bedienungsanleitung - Portugiesisch - 95 seiten

Yamaha CLP-440PE Bedienungsanleitung - Spanisch - 96 seiten

Yamaha CLP-440PE Bedienungsanleitung - Spanisch - 14 seiten

Yamaha CLP-440PE Bedienungsanleitung - Polnisch - 95 seiten

Yamaha CLP-440PE Bedienungsanleitung - Schwedisch - 95 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info