Bedienungsanleitung Yamaha CLP-480 (Seite 58 von 96) (Englisch)

590718

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Detailed Settings

Detailed settings for recording and playback — [FILE/SONG SETTING]

If you select a Song from an ensemble collection disk,

such as the “XG for Piano” disks, you can specify phrase

numbers in the score to play back from the score from the

mark point, or to play back the phrase repeatedly.

If you start playing back a Song with “Repeat On”

selected, the count down starts, followed by the repeated

playback of the specified phrase until you press the

[STOP] button.

If you select “Repeat Off,” normal playback starts without

repeat.

Setting range of the phrase number:

--- (not specified)

000 – the last phrase number of the Song

NOTE

If you select any Song without the phrase marks, you can select

only “Off.”

You can correct the timing of notes. For example, you can

adjust recorded notes to precise eighth or sixteenth notes.

Changes are made by Song.

Notes for which you can adjust the timing:

The three Quantize settings marked with asterisks (*) are

exceptionally convenient, since they allow you to quantize two

different note values at the same time. For example, when the

straight eighth notes and eighth notes triplet are contained in the

same part, if you quantize by the straight eighth notes, all notes in

the part are quantized to straight eighth notes—completely

eliminating any triplet feel.

However, if you use the eighth note + eighth note triplet setting,

both the straight and triplet notes will be quantized correctly.

Default setting:

1/16

Setting the Quantize strength*

From this display, you can determine how strongly the

notes will be quantized. A setting of 100% produces exact

timing. If a value less than 100% is selected, notes will be

moved toward the specified quantization beats according

to the specified percentage. Applying less than 100%

quantization lets you preserve some of the “human” feel

in the recording.

Setting range:

0% – 100%

Default setting:

100%

Playing back the phrase specified by

the phrase number*

PhraseMark

Correcting note timing*

Quantize

PhraseMark RepeatOff

001

Select repeat on or off.

Specify the phrase number.

Quantize Execute?

Strength=100% 1/16

Stores the changed value.

Specifies the type of note.Set the Quantize strength.

1/4................

1/8................

1/16..............

1/6................

1/12..............

1/24..............

1/8+1/12.......

1/16+1/24.....

1/32..............

1/16+1/12.....

quarter note

quarter note triplet

eighth note

eighth note triplet

sixteenth note

sixteenth note triplet

thirty-second note

eighth note + eighth note triplet*

sixteenth note + eighth note triplet*

sixteenth note + sixteenth triplet*

Original data

Quantizing strength=100

Quantizing strength=50

Quarter-note length

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-480 Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-480

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info