Bedienungsanleitung Yamaha CLP-480 (Seite 73 von 96) (Englisch)

590718

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Detailed Settings

Other settings — [FUNCTION]

Type of data:

Note, Control (Control Change), Program (Program Change), Pitch

Bend, SysEx (System Exclusive)

Setting range:

On/Off

Default setting:

On for all types of data

This parameter enables you to specify which MIDI data

the Clavinova can transmit.

Type of data:

Note, Control (Control Change), Program (Program Change), Pitch

Bend, SystemRealTime, SysEx (System Exclusive)

Setting range:

On/Off

Default setting:

On for all types of data

You can transmit the panel data, such as Voice selection,

to a connected sequencer. Before you record performance

data to a sequencer, it is useful if you first send and record

(at the beginning of the performance data) the panel

setup data for your performance during playback.

Press the B [+ (YES)] button to call up “Sure?->.” Press the

B [+ (YES)] button again to start actual transmission.

You can back up some settings, such as Voice selection

and metronome setting, so that they will not be lost after

you turn off the power to the Clavinova. Memory Songs

(saved in the Clavinova’s memory), the backup on/off

setting (this parameter setting), and the “CharacterCode”

parameter setting (page 48) are always backed up.

NOTICE

It takes a few seconds to save the settings. If you turn off the

power of the instrument right after changing the setting, the setting

may not be saved.

Setting for:

Transpose

Brilliance

ReverbOnOff

SoundSetting (for the I.A. Control and GP Soundboard Speaker)

SplitPoint

Main/LeftVoice

MetronomeSetting

File/SongSetting

MidiSetting (“MidiOutChannel” – “TransmitParameter” in the

Function settings)

Function (except for Transpose, SplitPoint and Midi settings).

Setting range:

On/Off

Default setting:

The Transpose, Main/LeftVoice, MetronomeSetting, and Function

parameters are set to Off. Other parameters are set to On.

You can reset the Clavinova to its factory default settings.

• The CharacterCode parameter setting does not change.

• The MemoryBackup parameter setting (On/Off) (left

column) is reset to the default setting.

• You can select whether the “Memory Songs” (Songs in

the MEMORY drive) are erased or kept.

NOTE

The “Default setting” refers to the initial setting preprogrammed

when shipped from the factory, called up when you first turn on the

power to this instrument.

NOTICE

Do not turn off the power during factory set. Doing so could result

in damage to the data.

Selecting the type of data transmitted

via MIDI

TransmitParameter

Transmitting the initial settings on

the panel

InitialSetup

ReceiveParameter

Note On

Select on or off.Select a type of data.

TransmitParameter

Note On

Select on or off.Select a type of data.

InitialSetup Start?

Start transmission.

Selecting items saved at shutdown

MemoryBackup

Restoring the factory default settings

FactorySet

MemoryBackup

Transpose Off

Select on or off.Select the desired item.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-480 Seite 73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-480

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info