Bedienungsanleitung Yamaha CLP-480 (Seite 79 von 96) (Englisch)

590718

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Appendix

Message List

Maximum no. of devices

exceeded

The number of USB storage devices exceeds the limitation. Up to two USB storage devices can be

connected simultaneously. For details, see page 51.

Memory full

Since the capacity and the number of files of MEMORY drive/USB storage device are full, the

operation cannot be made. Delete some Songs in the MEMORY drive/USB storage device or move

Songs to another USB storage device, and try again.

Move to?->

This message prompts you to select the Move destination. Follow the instructions in “Moving files”

on page 45.

Name?->

This message prompts you to change the name of the Song/folder which is currently displayed.

Follow the instructions in “Renaming files” (page 43) or “Making folders in the USB storage device”

(page 45) to change the name, or press the B [– (NO)] button to cancel.

No device

A USB storage device was not connected to the instrument when you attempted to perform a

device-related operation. Connect the device, and try again.

No device (media)

No media is not has been inserted to the selected USB storage device. Insert the media.

No file

This message appears when there is no backup file to load in the connected USB storage device.

No response

from USB device

The instrument cannot communicate with the connected USB device. Redo the connection (page

51). If you still see this message, the USB device may be damaged.

Notice:

Protected Song

This message appears when you attempt to handle the Protected Song. For information on the

limitation of file operations, see page 41.

Overwrite?->

The file already exists. This message prompts you to overwrite the existing data with new data. Press

the B [+ (YES)] button to proceed, or press the B [– (NO)] button to cancel.

Please wait

The instrument is processing the data. Wait until the message disappears, then go on to the next

step.

Protected device (media)

This message appears when you attempt a file operation (page 41), record your performance or

save the data on a read-only USB storage device. Cancel the read-only setting, if possible, and try

again. If you still see this message, the USB storage device is internally protected (such as

commercially available music data). You cannot make the file operation or record your performance

to such a device.

Protected Song

You attempted a file operation to a Protected Song or read-only file. Data of those types have

handling limitations (page 41), and also cannot be used for editing (page 37). Use a read-only file

after cancelling the read-only setting.

Remaining space

on drive is low

Since the remaining space on the MEMORY drive/USB storage device is low, delete any

unnecessary files (page 43) before recording.

Selected drive?->

This message prompts you for confirmation to continue the operation with the currently selected

USB storage device. Press the Press the B [+ (YES)] button to proceed, or press the B [– (NO)]

button to cancel.

Set?->

This message prompts you to save the settings. Press the B [+ (YES)] button to save, or press the

[EXIT] button to cancel.

Song error

This message appears, if a problem is found with the Song data when you select a Song or while the

Song is playing. In this case, reselect the Song, and try again to play back. If the message still

appears, the Song data may have been damaged.

Song too large

The size of Song data (MIDI/Audio) exceeds the limitation. The following causes can be considered.

• The Song size you attempt to play back exceeds the limitation. The limitation for playback is

approx. 550KB (MIDI), 80 minutes (Audio).

• The Song size exceeds the limitation during recording. The limitation for recording is approx.

550KB (MIDI), 80 minutes (Audio). The recording will end automatically and the recording data

before the end is saved.

• The Song size exceeds the limitation during converting a MIDI Song to an Audio Song. The

limitation is 80 minutes (Audio).

Start?->

This message prompts you to start the operation. Press the B [+ (YES)] button to start, or press the

[EXIT] button to cancel.

Sure?->

This message prompts you for confirmation of the operation. Press the B [+ (YES)] button to execute,

or press the B [– (NO)] button to cancel.

Message Meaning

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-480 Seite 79

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-480

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info