Bedienungsanleitung Yamaha CLP-511 (Seite 48 von 56) (Deutsch)

590740

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

3. PROGRAM CHANGE

Data format: [CnH] -> [pp]

CnH = program event (n = channel number)

pp = Program number

CLP-511

pp VOICE NAME

00 PIANO 1

01 PIANO 2

88 CLAVINOVA TONE

05 E. PIANO 1

04 E. PIANO 2

06 HARPSICHORD

48 STRINGS

19 PIPE ORGAN 1

16 PIPE ORGAN 2

CLP-411

pp VOICE NAME

00 PIANO

88 CLAVINOVA TONE

05 E. PIANO 1

04 E. PIANO 2

06 HARPSICHORD

19 PIPE ORGAN 1

16 PIPE ORGAN 2

4. SYSTEM REALTIME MESSAGES

[rrH]

F8H: Timing clock

FAH: Start

FCH: Stop

FEH: Active sensing

Data Transmission Reception

F8H Transmitted every Received as 96-clock tempo timing

96 clocks when MIDI clock is set to External

FAH Recorder start Recorder start

FCH Recorder stop Recorder stop

FEH Transmitted every All notes are turned off if no data is

200 milliseconds received for more than 400

milliseconds

* Caution: If an error occurs during MIDI reception, the Damper, Sostenuto,

and Soft effects for all channels are turned off and an All Note Off occurs.

5. SYSTEM EXCLUSIVE MESSAGES

(1) Panel Data Transmit

Data format: [F0H] -> [43H] -> [0nH] -> [7CH] -> ... ->

[F7H]

F0H, 43H, 0nH, 7CH (n: channel number)

00H, 2EH (

data length

)

43H, 4CH, 20H, 20H (CL)

43H, 4CH, 50H, 27H, 39H, 36H (CLP ’96)

30H, 30H (version x, y)

[PANEL DATA]

[CHECK SUM (1byte)] = 0-(43H+4CH+20H+......+Data end)

F7H

• Panel Data Contents

(1) Voice

(2) Dual On/Off

(3) Dual Voice

(4) Dual Balance

(5) Dual Detune

(6) Dual Voice1 Octave

(7) Dual Voice2 Octave

(8) Dual Voice1 Effect Depth

(9) Dual Voice2 Effect Depth

(10) Dual Slow-attack Strings On/Off (CLP-511)

(11) Split On/Off (CLP-511)

(12) Split Voice (CLP-511)

(13) Split Point (CLP-511)

(14) Split Balance (CLP-511)

(15) Split Voice1 Octave (CLP-511)

(16) Split Voice2 Octave (CLP-511)

(17) Split Voice1 Effect Depth (CLP-511)

(18) Split Voice2 Effect Depth (CLP-511)

(19) Split Damper Mode (CLP-511)

(20) Reverb Type 1

(21) Reverb Depth 1

(22) Effect Type 1

(23) Effect Type 2

(24) Effect Depth

(25) - - -

(26) Variation 1 On/Off

(27) Variation 2 On/Off

(28) Touch Sensitivity

(29) Touch Volume in the FIXED Mode

(30) Left Pedal (Soft/Start)

(31) - - -

(32) Absolute tempo low byte

(33) Absolute tempo high byte

(34) - - -

(2) Universal Realtime Message

Master Volume

Data format: [F0H] -> [7FH] -> [XnH] -> [04H] -> [01H] ->

[ll] -> [mm] -> [F7H]

F0 = Exclusive status

7F = Universal Realtime

7F = ID of target device

04 = Sub-ID #1=Device Control Message

01 = Sub-ID #2=Master Volume

ll = Volume LSB

mm = Volume MSB

F7 = End of Exclusive

F0 = Exclusive status

7F = Universal Realtime

XN = When N is received N=0~F, whichever is received.

x = don’t care

04 = Sub-ID #1=Device Control Message

01 = Sub-ID #2=Master Volume

ll = Volume LSB

mm = Volume MSB

F7 = End of Exclusive

(3) Universal Non-Realtime Message

General MIDI Mode On

Data format: [F0H] -> [7EH] -> [XnH] -> [09H] -> [01H] ->

[F7H]

F0 = Exclusive status

7E = Universal Non-Realtime

7F = ID of target device

09 = Sub-ID #1=General MIDI Message

01 = Sub-ID #2=General MIDI On

F7 = End of Exclusive

F0 = Exclusive status

7E = Universal Non-Realtime

XN = When N is received N=0~F, whichever is received.

X = don’t care

09 = Sub-ID #1=General MIDI Message

01 = Sub-ID #2=General MIDI On

F7 = End of Exclusive

When the General MIDI mode ON message is received, the MIDI

system will be reset to its default settings.

This message requires approximately 50ms to execute, so suffi-

cient time should be allowed before the next message is sent.

(4) XG Native Parameter Change

Data format: [F0H] -> [43H] -> [1nH] -> [4CH] -> [hh] ->

[mm] -> [ll] -> [dd] -> [F7H]

F0 = Exclusive status

43 = YAMAHA ID

1n = When n is received n=0~F, whichever is received.

When n is transmitted n always=0.

4C = Model ID of XG

hh = Address High

mm = Address Mid

ll = Address Low

dd = Data

F7 = End of Exclusive

Data size must match parameter size (2 or 4 bytes).

When the XG System On message is received, the MIDI system

will be reset to its default settings.

The message requires approximately 50ms to execute, so suffi-

cient time should be allowed before the next message is sent.

* When program change reception is turned OFF in the Function

mode, no program change data is transmitted or received.

de datos MIDI

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-511 Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-511

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info