Bedienungsanleitung Yamaha CLP-525 (Seite 2 von 8) (Englisch)

590745

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

CLP-525 MIDI Reference

MIDI Functions

When this instrument and a computer are connected with a USB cable, MIDI communication can be performed. The

explanations here cover the settings necessary for performing MIDI communication between both devices.

NOTE

For instructions on how to connect this instrument to the computer, refer to the “Computer-related Operations” downloadable from the Yamaha website:

http://download.yamaha.com/

In order to perform MIDI communication between this instrument and a computer, it is

necessary to match the corresponding MIDI transmit and receive channels. By setting the

MIDI transmit channels on this instrument, the setting of the keyboard or pedal

performance or the program change can be transmitted over the channel number

corresponding to a specified channel on the computer. By properly setting the MIDI receive

channels on this instrument, only data of the specified channel will be played back in the

MIDI data received from the computer.

Setting the Transmit Channel

While holding down [DEMO/SONG] and [PIANO/VOICE], press one of the C1 – E2

keys.

Setting the Receive Channel

While holding down [DEMO/SONG] and [PIANO/VOICE], press one of the C4 – F5

keys.

“Local Control” refers to the fact that, normally, the keyboard of the instrument controls its internal tone generator,

allowing the internal voices to be played directly from the keyboard. This situation is “Local Control On,” since the

internal tone generator is controlled locally by its own keyboard. Local Control can be turned off as desired, so that the

keyboard of the instrument does not play the internal voices.

While holding down [DEMO/SONG] and [PIANO/VOICE], press the C6 key. Pressing

the C6 key repeatedly toggles between Local Control On and Off.

MIDI Transmit/Receive Channel Selection

MIDI transmission channels

in Dual

Voice 1 data is transmitted on

the channel set up here.

Voice 2 data is transmitted on

the next greater channel number

relative to the specified channel.

MIDI receive channel = ALL:

This allows simultaneous

reception of different parts on all

16 MIDI channels. When SMF

Song data is played back on a

computer with the Voice of this

instrument, this setting should

be selected. However, when a

Voice not available on the

instrument is specified, the

playback sound may not be

suitable.

MIDI receive channel = 1+2:

This allows simultaneous

reception on channels 1 and 2

only. When SMF Song data is

played back on a computer, this

setting should be selected for

playing back only data of

channels 1 and 2 on this

instrument.

NOTE

Panel settings (Voices, etc.) of

this instrument will not be

affected by MIDI messages

received from a computer.

NOTE

Data for the demo songs and

piano preset songs cannot be

transmitted via MIDI.

C1 C4

E2 F5

11 14 169

568 10 12 13 15

OFF

742 11 14 169

568 10 12 13 15

1+2

ALL

742

Transmit Channel

(C1 – E2)

Receive Channel

(C4 – F5)

Local Control ON/OFF

Default setting:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-525 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-525

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info