Bedienungsanleitung Yamaha CLP-565GP (Seite 94 von 126) (Englisch)

590828

Zoom out

Zoom in

Vorherige Seite

1/126

Nächste Seite

CLP-585/575/545/535/565GP Owner’s Manual

System Menu

This lets you set whether some settings of the Backup

Setting (below) are maintained or not when the power

is turned off. The Backup Setting consists of two

groups, “Voice” (including Voice related settings such

as Voice selection) and “Other” (including various

settings such as Song Repeat and Tuning), which can

be set individually.

1. Press the [MENU] button several times to

select “System Menu.”

2. Use the [ ]/[ ] buttons to select “Backup,”

use the [>] button to call up the next display,

then use the [

]/[ ] buttons to select

“Backup Setting.”

3. Use the [>] then the [ ]/[ ] buttons to select

“Voice,” then use the [>] button to select “On”

or “Off.”

Each “Voice” contains the following settings:

• Voice selection for R1, R2 and L

• On/off status for the Dual/Split.

• All the parameters other than Split Point in the Voice

4. Use the [ ]/[ ] buttons to select “Other,”

then use the [>] button to select “On” or

“Off.”

The “Other” contains the following settings:

• In the Voice Menu: Split Point

• In the Song Menu: Song Repeat, Song-Keyboard,

Audio Volume, Quick Play, Play Track

• In the Metronome Menu: Volume, BPM, Bell On/Off,

Intro, Ending

• In the System Menu: Tuning, Keyboard, Pedal, Sound,

MIDI

5. Press the [EXIT] button to exit from the

System Menu display.

This lets you save data on internal memory to the

connected USB flash memory as a backup file (named

“clp-***.bup”). This backup file can be loaded to the

instrument via the Restore function (page95) for

future.

NOTICE

• It may take 1 – 2 minutes to complete this operation. Never turn

off the power during this operation (while “Executing” is shown).

Doing so could result in damage to the data.

• If the same backup file (clp-***.bup) is already saved in the USB

flash memory, this operation will overwrite or replace this file with

new one.

1. Connect the USB flash memory to the USB

[TO DEVICE] terminal.

2. Press the [MENU] button several times to

select “System Menu.”

3. Use the [ ]/[ ] buttons to select “Backup,”

use the [>] button to call up the next display,

then use the [

]/[ ] buttons to select

“Backup.”

4. Use the [>] button to call up the next display,

then use the [

]/[ ] button select “Execute.”

5. Press the [>] button to execute the Backup

operation.

6. Press the [EXIT] button to exit from the

System Menu display.

NOTE

When you want to restore the settings in the backup file, execute

the Restore function.

NOTE

Protected Songs cannot be backed up.

 Backup Setting

(Selecting parameters maintained even when the

power is turned off)

Data maintained even when the power is

turned off

• User MIDI Song (saved in this instrument’s

“User” memory)

• Utility

•Backup Setting (explained here)

 Backup

(Saving the Backup file for internal data)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-565GP Seite 94

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-565GP

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info