Bedienungsanleitung Yamaha CLP-565GP (Seite 104 von 126) (Englisch)

590828

104

Zoom out

Zoom in

Vorherige Seite

1/126

Nächste Seite

104

CLP-585/575/545/535/565GP Owner’s Manual

Troubleshooting

When a message is displayed, refer to the “Message List” (page 102) for troubleshooting aid.

Problem Possible Cause and Solution

The instrument does not turn

on.

The instrument has not been plugged in properly. Securely insert the female plug into the socket on the

instrument, and the male plug into a proper AC outlet (page 14).

A click or pop is heard when

the power is turned on or off.

This is normal when electrical current is being applied to the instrument.

The power is automatically

turned off.

This is normal and due to the Auto Power Off function. If necessary, set the parameter of the Auto Power Off

function (page 93).

The message “USB device

overcurrent error” is shown

and the USB device does not

respond.

Communication with the USB device has been shut down because of the overcurrent to the USB device.

Disconnect the device from the USB [TO DEVICE] terminal, then turn on the power of the instrument.

Noise is heard from the

speakers or headphones.

The noise may be due to interference caused by the use of a mobile phone in close proximity to the instrument.

Turn off the mobile phone, or use it further away from the instrument.

Noise is heard from the

instrument’s speakers or

headphones when using the

instrument with the

application on iPhone/iPad.

When you use the instrument along with the application on your iPhone/iPad, we recommend that you set

“Airplane Mode” to “ON” on your iPhone/iPad in order to avoid noise caused by communication.

The overall volume is low, or

no sound is heard.

The Master Volume is set too low; set it to an appropriate level using the [MASTER VOLUME] slider (page 19).

The volume level for the keyboard performance is set too low. Adjust the volume balance to increase the

keyboard volume via the Song Menu display: “Volume”  “Song - Keyboard” (page 47.)

Headphones are connected when the Speaker setting is “Normal” (page 92). Disconnect the headphone plug.

The Speaker setting is “Off.” Set the Speaker to “Normal” via the System Menu display: “Utility”  “Speaker”

(page 92.)

Local Control is “Off.” Set Local Control “On” via the System Menu display: “MIDI”  “Local Control” (page 91.)

“Expression” is assigned to the right pedal or the AUX pedal (CLP-585). Assign any function other than

“Expression” to the pedal (page 82) via the Voice Menu display: “Pedal Assign”  “Right” (page 82) or the

System Menu display: “Pedal”  “Aux Assign” (CLP-585) (page 90.)

The speakers do not switch

off when a pair of

headphones is connected to

the [PHONES] jack.

The Speaker setting is “On.” Set the speaker setting to “Normal” via the System Menu display: “Utility” 

“Speaker” (page 92.)

Pedals do not function. The pedal cord may not be securely connected to the [PEDAL] jack. Be sure to insert the pedal cord all the way

until the metal part of the cord plug disappears from view (pages 109, 113, 115 or 118).

(CLP-585)

The on/off setting of the pedal

connected to the AUX PEDAL

jack is reversed.

Some types of pedals may turn on and off in opposite fashion. Set to the appropriate parameter via the System

Menu display: “Pedal”  “Aux Polarity” (page 90.)

The keyboard volume is

lower than the Song playback

volume.

The volume level for the keyboard performance is set too low. Adjust the volume balance to increase the

keyboard volume via the Song Menu display: “Volume”  “Song - Keyboard” (page 47.)

The buttons do not respond. While you are using a function, some buttons not used for the function are disabled. If the Song is playing, stop

playback. Otherwise, press the [EXIT] button to return to the Voice or Song display, Then, perform the desired

operation.

Higher or lower notes do not

sound correctly when the

transpose or octave setting is

made.

This instrument can cover the range of C -2 – G8 when you set the transposition or octave. If notes lower than C

-2 are played, the sound is moved one octave higher. If notes higher than G8 are played, the sound is moved

one octave lower.

Performance in Dual or Split

mode is not recorded, or part

data is lost unexpectedly.

Switching to Dual mode or Split mode in the middle of the Song is not recorded. Also, the recording part for the

Voice 2 (Dual mode) or the left-hand Voice (Split mode) is automatically assigned (page 53). If the assigned part

already has data, the data will be overwritten and deleted when you record.

The Song title is not correct. The “Language” setting may be different than that is selected when you named the Song. Also, if the Song was

recorded on another instrument, the title might be displayed incorrectly. Set the “Language” parameter (page

93) via the System Menu display: “Utility”  “Language”  “Song” to change the setting. However, if the Song

was recorded on another instrument, changing the “Language” parameter setting may not resolve the problem.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-565GP Seite 104

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-565GP

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info