Bedienungsanleitung Yamaha CLP-611 (Seite 25 von 72) (Englisch)

590832

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Select the track you want to record.

The red indicator shows the

currently selected track. If

you wish to change the

selection, press the appro-

priate track button ([1] or

[2]).

Start the recording.

Recording begins automati-

cally when you play a note

at the keyboard. As an

alternative, you can begin

the recording by pressing

the [START/STOP] button.

Stop the recording.

You can stop the recording by pressing either [REC] or [START/STOP].

The indicator above the recorded track will change to green, to indicate

that the track contains data.

Changing initial settings

After recording is completed, it remains possible to modify the initial settings

that you selected at Step 1 above. (It is not possible, however, to modify SPLIT

or DUAL settings.)

When making such a change, BE CAREFUL! DO NOT hit any keys on the

keyboard and do not press the [START/STOP] button, as doing so will cause

erasure of all your data.

To make a change, proceed as follows.

(a) Press [REC] to enter RECORDING mode.

(b) If necessary, press the track button for the track you want to change (so

that the indicator is red).

would press the appropriate voice selector.

(d) Press [REC] again to exit RECORDING mode.

CLP-811/611 Using the Recorder

If the selected track already

contains recorded data...

That data will be lost when you

begin actual recording as

described in Step 5 below.

The approximate amount of

remaining memory...

appears at the upper right of the

screen (in kilobytes). The starting

value (with both tracks empty) is

21.

The first metronome dot

flashes in time with the current

tempo setting.

Using the left pedal as a

START/STOP switch...

You can set the left pedal to

operate in the same way as the

[START/STOP] button, so that

you can start and stop recording

without using your hands. Left-

pedal operation is determined by

function F9; see page 33 for

details.

The screen counts the

measures (in accordance with

the TEMPO setting) as recording

proceeds. The metronome dot

display keeps track of the beat.

You are free to switch the

metronome sound on or off. The

metronome sound is not included

in the recording.

Maximum recording capacity...

is approximately 4,200 notes, but

varies somewhat according to

pedal usage and other such

factors. The recording indicator

begins flash when memory is

almost full. If memory becomes

completely full, recording stops

and the Memory Full! message

appears.

BRILLIANCE

REVERB EFFECT TOUCH

NORMAL

ROOM

MEDIUM

TEMPO

Remaining memory

Flashing

BRILLIANCE

REVERB EFFECT TOUCH

NORMAL

ROOM

MEDIUM

MEASURE

TEMPO

Measure count

Beat

If you begin making a change at

Step (c) but then wish to

cancel it, you can do so by

pressing the other track button

and then pressing [REC].

Tempo, reverb type/depth, and

effect type settings...

apply to both tracks. If you

change the value for one track,

the change automatically applies

to both.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-611 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-611

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info