Bedienungsanleitung Yamaha CLP-611 (Seite 33 von 72) (Englisch)

590832

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

CLP-811/611 Configuration Functions (FUNCTION mode)

F4.DualFunc. (Settings for DUAL mode.)

You use this function to set various parameters for

DUAL-mode play.

1 To access this function: first activate DUAL mode (by

pressing two voice selectors at the same time), then

press [FUNCTION], and then press [t] or [s] to

proceed to F4.

2 Next, press [+/YES] to enter the subfunction group.

Then use [t], [s] to move among the different

subfunctions, and [-/NO], [+/YES] to set the values.

NOTE

If you are not working in DUAL mode...

The top right of the screen will display a triple

dash (---) and you will not be able to enter the

subfunction group. To enable entry, activate

DUAL mode by pressing two voice selectors at

the same time. (You can do this without leaving

FUNCTION mode).

Subfunctions

4.1 D.Balance (Voice volume balance)

Settings: 0,...,20 [10 = equal balance]

[Above 10, Voice 1 is louder.]

Default: Varies according to voice combination

Sets the relative volumes for the two voices. This function is

useful when you want to highlight one voice while playing the

other as a backdrop.

4.2 D.Detune (Voice tuning divergence)

Introduces slight pitch difference between the two voices,

producing a somewhat fatter sound.

Values: -10,...,+10 [0: No detuning]

[0 → +10: Voice

1 pitch rises]

[0 → -10: Voice

2 pitch rises]

Default: Varies according to voice combination

4.3 Vc1.Octave (Octave shift for Voice #1)

4.4 Vc2.Octave (Octave shift for Voice #2)

Values: -1, 0, +1

Default: Varies according to voice combination

These subfunctions allow you to shift each voice up or down

an octave. Each combination produces its own distinctive

sound and acoustics.

4.5 Vc1.EffDpt (Effect depth for Voice #1)

4.6 Vc2.EffDpt (Effect depth for Voice #2)

Values: 0,...,20

Default: Varies according to voice combination

These subfunctions allow you to set the depth for each voice’s

effect. Setting is not available if the effect is set OFF. Note that

you cannot change a voice’s effect selection while working in

FUNCTION mode; you must first return to normal mode.

NOTE

“Voice

1” is identified by the first (left-side)

voice name on the screen. For information about

how the Clavinova selects the voice order, see

page 17.

4.7 Str.Atk (Attack speed for STRINGS voice)

Values: SLOW, FAST

Default: FAST

Sets the attack speed (the initial rise speed) for the STRINGS

voice. A SLOW attack can create an interesting ambience for

certain types of songs. (Note that this setting is effective only if

STRINGS is selected as one of the voices.)

4.8 ResetOK? (Return to factory defaults.)

Press [+/YES] to return all of the DUAL-mode subfunction

settings to the factory defaults. (Factory defaults are different

for each voice combination.)

NOTE

As a shortcut, you can switch directly into

FUNCTION mode’s F4.DualFunc. area by

holding down the two appropriate voice selectors

and pressing [FUNCTION]. Once you have

changed the settings, press [FUNCTION] again

to quit the mode.

F5.SplitFunc. (Settings for SPLIT mode.)

You use this function to set various parameters for

SPLIT-mode play.

1 To access this function: first enter SPLIT mode, then

press [FUNCTION], and then press [t] or [s] to

proceed to F5.

2 Next, press [+/YES] to enter the subfunction group.

Then use [t], [s] to move among the different

subfunctions, and [-/NO], [-/YES] to set the values.

NOTE

If you are not working in SPLIT mode when you

enter the main F5 screen...

The top right of the screen will display a triple

dash (---) and you will not be able to enter the

subfunction group. To enable entry, you must first

quit FUNCTION mode and press the [SPLIT]

button.

Subfunctions

5.1 SplitPoint (Split point)

Values: Any key on keyboard

Default: F

Selects the split point. The selected key becomes the top note

of the left zone.

• Once you are at this screen, you can select the split point

simply by pressing the appropriate key.

• To set the split point without entering FUNCTION mode:

Hold down [SPLIT] and press the appropriate key, see page

18.

BRILLIANCE

REVERB EFFECT TOUCH

NORMAL

ROOM

MEDIUM

TEMPO

BRILLIANCE

REVERB EFFECT TOUCH

NORMAL

ROOM

MEDIUM

TEMPO

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-611 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-611

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info