Bedienungsanleitung Yamaha CLP-635 (Seite 26 von 144) (Englisch)

707418

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

CLP-685, CLP-675, CLP-645, CLP-635, CLP-695GP, CLP-665GP Owner’s Manual

Enjoying the Piano Performance

What you can do in the Piano Room

Item Icon Descriptions

Default

settings

Setting Range

Lid Position Determines how much the Lid is opened. Full Full, Half, Close

Brightness Adjusts the brilliance of sound. Differs

depending on

the Voice.

0 – 10

Touch Determines how the sound responds to your playing

strength. You should adjust this setting according to the

specific Voice you’re playing or the particular Song you’re

performing, as desired.

Medium Soft2, Soft1,

Medium, Hard1,

Hard2, Fixed

Reverb Determines the Reverb type which is applied to all the entire

sound including the keyboard performance, Song playback

and MIDI data input from an external MIDI device.

Differs

depending on

the Voice.

Refer to the

Reverb Type

List (page 89)

Reverb

Depth

Adjusts the Reverb depth. When “Reverb” is set to “off” or a

value of “0,” no effect is produced.

Differs

depending on

the Voice.

0 – 127

Master Tune Fine tunes the pitch of the entire instrument. This function is

useful when you play this instrument along with other

instruments or CD music.

A3 = 440.0 Hz A3 = 414.8 Hz –

466.8 Hz

(approx. 0.2 Hz

steps)

VRM Turns the VRM effect on/off. For information about the VRM

function, refer to page 27. For details about the Piano Voices

compatible with VRM, refer to the “Preset Voice List” on

page 102.

Listening to the VRM Demo

You can hear the difference of

VRM On/Off by pressing the [

R/K]

(Play/Pause) button while VRM On/

Off display is being displayed.

If you press the [

R/K] (Play/Pause)

button while VRM is On, the Demo

Song of VRM On will play back. If you press the [

R/K] (Play/

Pause) button while VRM Off, the Demo Song of VRM Off will

play back.

On On, Off

Damper Res. Determines the depth of the string resonance effect which is

applied when the damper pedal is pressed. This parameter

can be set when VRM is on.

50 – 10

String Res. Determines the depth of the string resonance effect which is

applied when a note on the keyboard is pressed. This

parameter can be set when VRM is on.

50 – 10

Aliquot Res. Adjusts the sympathetic vibrations of the Aliquot resonance

effect. For details about Aliquot, refer to “What is Aliquot?”

(page 27).

50 – 10

Body Res. Adjusts the resonance of the piano itself, i.e. soundboard, the

sides, the frame and so on. This parameter can be set when

VRM is on.

50 – 10

Key Off Sample Determines the volume of the key-off sound (the subtle sound

that occurs when you release a key) which is available only

for some Voices. For Voices to which this effect is applied,

refer to the Voice List (page 102).

50 – 10

Half Pedal Point Specify the point to which you must depress the right pedal

before the effect of “Sustain Continuously” begins to be

applied. This setting applies only to the “Sustain

Continuously” effect (page 89) that is assigned to the right

pedal.

-2 (effective with

the shallowest

press) – 0 – +4

(effective with the

deepest press)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-635 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-635

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info