Bedienungsanleitung Yamaha CLP-635 (Seite 101 von 144) (Englisch)

707418

101

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

System Menu

101

CLP-685, CLP-675, CLP-645, CLP-635, CLP-695GP, CLP-665GP Owner’s Manual

This lets you load the backup file (clp-***.bup) saved

via the Backup function (page 100) to the instrument

on.

NOTICE

• It may take 1 – 2 minutes to complete this operation. Never turn

off the power during this operation (while “Executing” is shown).

Doing so could result in damage to the data.

• If Protected Songs or recorded Songs reside on “User” memory,

make sure to move the Songs to the USB flash drive by following

the instructions page 66 before executing this operation. If you

do not, the Songs will be deleted via this operation.

1. Connect the USB flash drive containing the

Backup file to the USB [TO DEVICE]

terminal.

2. Press the [FUNCTION] button several times

to select “System” menu.

3. Use the [u]/[d] buttons to select “Backup,”

use the [>] button to call up the next display,

then use the [

u]/[d] buttons to select

“Restore.”

4. Use the [>] button to call up the next display,

then use the [

u]/[d] button select “Execute.”

5. Press the [>] button to execute the Restore

operation.

A message indicating that the operation is

completed appears, then the instrument will restart

after a while.

This lets you reset this instrument to its factory

default settings which refers to the initial setting

preprogrammed when shipped from the factory, and

is called up when you first turn on the power to this

instrument.

Note that the following points.

• This operation resets the Backup Setting (page 100) to the

default setting.

• This operation will not delete the Songs saved in the User

folder.

• This operation will not delete the Bluetooth* pairing

information (page 82).

*For information on whether Bluetooth functionality is included

with the instrument or not, refer to page 138.

NOTICE

Never turn off the power during this operation (while “Factory set

executing” is shown). Doing so could result in damage to the data.

1. Press the [FUNCTION] button several times

to select “System” menu.

2. Use the [u]/[d] buttons to select “Backup,”

use the [>] button to call up the next display,

then use the [

u]/[d] buttons to select

“Factory Set.”

3. Use the [>] button to call up the next display,

then use the [

u]/[d] buttons to select

“Execute.”

4. Press the [>] button to execute the Restore

operation.

A message indicating that the operation is

completed appears, then the instrument will restart

after a while.

 Alternate method for restoring the default

settings

Press and hold down the white key on the right end

(C7) and press the [P] (Standby/On) switch to turn

on the power to this instrument. This operation will

not delete the Songs in the User folder.

 Restore

(Restarting the instrument with the Backup file

loaded)

 Factory Set

(Restarting the instrument with the initial

factory settings loaded)

[P] Standby/On switch

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-635 Seite 101

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-635

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info