Bedienungsanleitung Yamaha CLP-820 (Seite 32 von 72) (Englisch)

593306

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

CLP-880/860/840/820/820S

The Function Mode

CLP-880/860 Pedal Functions

After selecting “F5.Y”, press the [+/YES] button to engage the pedal functions sub-mode,

then use the FUNCTION [<] and [>] buttons to select the desired pedal functions, as listed

below.

F5.1: Left Pedal Mode ............................................................................................................................

This function conveniently lets you set the left pedal for normal soft pedal operation, or for

song start/stop operation. Use the [–/NO] and [+/YES] buttons to select the desired left-

pedal mode. Press the [–/NO] and [+/YES] buttons simultaneously to recall the default

setting “1”.

1: Soft The left pedal functions as the soft pedal.

2: Start/Stop The left pedal functions in the same manner as the [START/STOP] button.

F5.2: Damper Mode...................................................................................................................................

This function lets you set how the damper pedal affects the sustain sound. There are two

modes for pedal operation.

1: Switch In this mode the pedal acts as a simple on/off switch for sustain.

2: Continuous In this mode the pedal continuously changes the amount of sustain (in eight-

step gradations) i.e., the further down you press the pedal the longer the sound

sustains.

Use the [–/NO] and [+/YES] buttons to select the desired damper mode. Press the [–/NO]

and [+/YES] buttons simultaneously to recall the default setting “2”.

This function sets the left pedal for normal soft-pedal operation, for song start/stop opera-

tion, or for sostenuto (CLP-820S only) operation. Use the [–/NO] and [+/YES] buttons to

select the desired left-pedal mode. “1” is the normal soft-pedal mode, “2” is the start/stop

mode, and “3” is the sostenuto mode (CLP-820S only). When the start/stop mode is selected,

the left pedal functions in the same way as the panel [START/STOP] button. Press the

[–/NO] and [+/YES] buttons simultaneously to recall the default setting “1”.

CLP-840/820/820S Left Pedal Mode

F5.3: Soundboard Depth.....................................................................................................................

Certain piano voices (GRAND PIANO, CLASSICAL PIANO, and JAZZ PIANO) feature

a special effect which recreates the ring of the strings and the soundboard resonance of an

actual acoustic piano when the damper pedal is pressed. This function lets you adjust the

depth of this effect. Use the [–/NO] and [+/YES] buttons to set the effect depth as required.

The effect depth range is from 0 through 20. A setting of “0” produces no effect, while a

setting of “20” produces maximum effect depth. Press the [–/NO] and [+/YES] buttons

simultaneously to recall the default setting “12”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-820 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-820

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info