Bedienungsanleitung Yamaha CLP-880M (Seite 26 von 72) (Englisch)

593320

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

CLP-880/860/840/820/820S

Using the Recorder

Playback

To play back what you’ve recorded, first make sure that the green track

indicators of the tracks you want to play are lit. If not, press the corresponding

track button(s) so that they are lit. Then press the RECORDER [START/

STOP] button. Playback starts from the beginning of the recorded data, and

will stop automatically at the end of the recorded data. You can also stop

playback at any time by pressing the [START/STOP] button.

To mute a track so that it doesn’t play back, press the corresponding track

button so that its indicator goes out (press again to turn the track back on).

The current measure number appears on the display during playback.

• It is possible to play along on the keyboard during playback. In this case, the

playback voice and the voice you play on the keyboard are not the same. The

playback voice is the voice that was set when the data was recorded. The voice

you play on the keyboard is the voice that is selected on the panel.

• The playback volume and tempo can be adjusted by using the [MASTER VOL-

UME] control and [TEMPO

▼

▲

] buttons (press both [TEMPO

▼

▲

] buttons

simultaneously to recall the default tempo).

• All recorder data will be retained in memory for about one week after the power is

turned off. If you want to keep your recorded data for longer periods, turn the power

on for a few minutes at least once a week. It is also possible to store it to an

external MIDI storage device such as the Yamaha MIDI Data Filer MDF3 by using

the Bulk Data Dump function described on page 36.

• The track indicators will not light automatically when the power is turned on even if

the recorder contains data. It is therefore necessary to press the track buttons so

that the corresponding green indicators light before starting RECORDER playback.

It is also a good idea to press the track buttons to check if the tracks contain data

before recording. If the green indicator lights when the corresponding track button

is pressed, that track contains data which will be erased and replaced by the

newly-recorded data.

• If the metronome is being used during playback, the metronome will automatically

stop when playback is stopped.

• During recorder playback, the volume of a track which is turned off will always be

“0” (i.e. the “Piano Song Part Cancel Volume” function — page 33 — only affects

piano song playback.

• The playback data is not transmitted via the MIDI OUT connector.

• Playback cannot be started when the demo/piano song mode is engaged.

• Playback cannot be started when the recorder contains no data, or when both track

buttons are off.

• When using REVERB or EFFECT during playback, depending upon the conditions

one reverb type and one effect type will take priority.

Synchro Start ....................................................................................................................

When the Synchro Start function is engaged, recorder playback will begin

automatically as soon as you start playing on the keyboard.

To engage the Synchro Start function press the [START/STOP] button

while holding a track button which is ON. The rightmost dot on the display will

flash at the current tempo. (Repeat the previous operation to disengage the

Syncro Start function.) Playback will then start as soon as you begin playing on

the keyboard.

If you hold a track button which is OFF while pressing the [START/STOP]

button, that track will be turned ON and the Synchro Start mode will be engaged.

Left Pedal Start/Stop .................................................................................................

The left pedal can be assigned to start and stop recorder playback via the

“Left Pedal Mode” function described on page 32. This is convenient for

starting playback of the recorded part anytime after you have started playing.

START

STOP

REC

RECORDER

START

STOP

REC

RECORDER

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-880M Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-880M

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info