Bedienungsanleitung Yamaha CLP-930 (Seite 26 von 66) (Englisch)

593324

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

CLP-950/930

Playback

To play back what you’ve recorded, first make sure that the green track indica-

tors of the tracks you want to play are lit. If not, press the corresponding track

button(s) so that they are lit. Then press the SONG [START/STOP] button.

Playback starts from the beginning of the recorded data, and will stop automati-

cally at the end of the recorded data. You can also stop playback at any time by

pressing the SONG [START/STOP] button.

To mute a track so that it doesn’t play back, press the corresponding track

button so that its indicator goes out (press again to turn the track back on).

The current measure number appears on the display during playback.

• It is possible to play along on the keyboard during playback. In this case, the playback

voice and the voice you play on the keyboard are not the same. The playback voice is

the voice that was set when the data was recorded. The voice you play on the keyboard

is the voice that is selected on the panel.

• The playback volume and tempo can be adjusted by using the [MASTER VOLUME]

control and [TEMPO/FUNCTION

▼

▲

] buttons (press both [TEMPO/FUNCTION

▼

▲

]

buttons simultaneously to recall the default tempo).

• All user song recorder data will be retained in memory for about one week after the

power is turned off. If you want to keep your recorded data for longer periods, turn the

power on for a few minutes at least once a week. It is also possible to store it to an

external MIDI storage device such as the Yamaha MIDI Data Filer MDF3 by using the

Bulk Data Dump function described on page 35.

• The track indicators will not light automatically when the power is turned on even if the

user song recorder contains data. It is therefore necessary to press the track buttons so

that the corresponding green indicators light before starting recorder playback. It is also

a good idea to press the track buttons to check if the tracks contain data before

recording. If the green indicator lights when the corresponding track button is pressed,

that track contains data which will be erased and replaced by the newly-recorded data.

• If the metronome is being used during playback, the metronome will automatically stop

when playback is stopped.

• During recorder playback, the volume of a track which is turned off will always be “0”

(i.e. the “Preset Song Part Cancel Volume” function — page 32 — only affects preset

song playback.

• The playback data is not transmitted via the MIDI OUT connector.

• Playback cannot be started when the demo/preset song mode is engaged.

• Playback cannot be started when the recorder contains no data, or when both track

buttons are off.

• If the REVERB type is changed via the panel controls during playback, both the

playback and keyboard reverb effects will be changed.

• If the EFFECT type is changed via the panel controls during playback, the playback

effect may be switched off in some cases.

When the Synchro Start function is engaged, recorder playback will begin

automatically as soon as you start playing on the keyboard.

To engage the Synchro Start function press the SONG [START/STOP] button

while holding a track button which is ON. The rightmost dot on the display will

flash at the current tempo. (Repeat the previous operation to disengage the Syncro

Start function.) Playback will then start as soon as you begin playing on the key-

board.

If you hold a track button which is OFF while pressing the SONG [START/STOP]

button, that track will be turned ON and the Synchro Start mode will be engaged.

Synchro Start ............................................................................................................................

Left Pedal Start/Stop .........................................................................................................

The left pedal can be assigned to start and stop recorder playback via the “Left Pedal

Mode” function described on pages 31 (CLP-930) and 32 (CLP-950). This is conve-

nient for starting playback of the recorded part anytime after you have started playing.

ESET

TRACK

START/

STOP

REC

SONG

ESET

TRACK

START/

STOP

REC

SONG

TEMPO/FUNCTION/SONG

Using the User Song Recorder

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-930 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-930

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info