Bedienungsanleitung Yamaha CLP-950 (Seite 32 von 66) (Englisch)

593325

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

CLP-950/930

CLP-950 Metronome Volume

The volume of the metronome sound can be changed. After selecting “F5” or “F6”, use

the [–/NO] and [+/YES] buttons to set the metronome volume as required. The volume range

is from 1 through 20. A setting of “1” produces minimum sound, while a setting of “20”

produces maximum metronome volume. Press the [–/NO] and [+/YES] buttons simulta-

neously to recall the default setting “10”.

CLP-930 Metronome Volume

CLP-950 Pedal Functions

After selecting “F5.Y”, press the [+/YES] button to engage the pedal functions sub-mode,

then use the [TEMPO/FUNCTION t, s] buttons to select the desired pedal functions, as

listed below.

CLP-930 Preset Song Part Cancel Volume

This function sets the volume at which a “canceled” part is played during preset song

playback (see page 15 for information on the “part-cancel” function). Use the [–/NO] and [+/

YES] buttons to set the volume as required. The volume range is from 0 through 20. A setting

of “0” produces no sound, while a setting of “20” produces maximum volume. Press the [–/

NO] and [+/YES] buttons simultaneously to recall the default setting “5”.

Adjust the part volume to a comfortable level to use the “canceled” part as a guide to play

along with. Set to “0” if you don’t want to hear the part.

■ SHORTCUT: You can jump directly to the metronome functions by pressing the [FUNC-

TION] button while holding the METRONOME [START/STOP] button.

F5.1: Left Pedal Mode.............................................................................................................................

This function conveniently lets you set the left pedal for normal soft pedal operation, or for

song start/stop operation. Use the [–/NO] and [+/YES] buttons to select the desired left-

pedal mode. Press the [–/NO] and [+/YES] buttons simultaneously to recall the default

setting “1”.

1: Soft The left pedal functions as the soft pedal.

2: Start/Stop The left pedal functions in the same manner as the SONG [START/STOP] button.

F5.2: Sustain Sample Depth............................................................................................................

The CLP-950 GRAND PIANO 1 voice features special “Sustain Samples” which recreate the

unique resonance of an acoustic grand piano’s soundboard and strings when the damper pedal is

pressed. This function lets you adjust the depth of this effect. Use the [–/NO] and [+/YES]

buttons to set the effect depth as required. The effect depth range is from 0 through 20. A setting

of “0” produces no effect, while a setting of “20” produces maximum effect depth. Press the [–/

NO] and [+/YES] buttons simultaneously to recall the default setting “12”.

CLP-950 Preset Song Part Cancel Volume

The Function Mode

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-950 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-950

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info