Bedienungsanleitung Yamaha CLP-950M (Seite 37 von 66) (Englisch)

593327

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

CLP-950/930

Connecting to a Personal Computer

Although the Clavinova can be connected to a personal computer via the

MIDI IN/OUT connectors and a MIDI interface, the TO HOST connector and

HOST SELECT switch allow direct connection to Apple Macintosh or IBM-PC/AT

personal computers for sequencing and other music applications without the

need for a separate MIDI interface.

Connect the TO HOST connector of the Clavinova to the modem or

printer port on your Macintosh, depending on which port your MIDI

software is using for MIDI data communication, using a standard

Macintosh 8-pin system peripheral cable. Set the HOST SELECT

switch to the “Mac” position.

You may also have to make other MIDI interface settings on the

computer side, depending on the type of software you use (refer to your

software owner’s manual). In any case the clock speed should be set to

1 MHz.

Connecting to an Apple Macintosh Series

Computer

................................................................................................................

● “Mac” Cable Connections

2 (HSK i)1

1 (HSK 0)2

5 (RxD-)3

MINI DIN

8-PIN

4 GND4

3 (TxD-)5

8 (RxD+)6

7 (GP i)7

6 (TxD+)8

MINI DIN

8-PIN

• 8-pin system peripheral cable.

• Data transfer rate: 31,250 bps.

NOTE

• When connecting the Clavinova to a personal computer, first turn the power to both the Clavinova and the computer

OFF before connecting the cable and setting the HOST SELECT switch. After connecting the cable and making the

appropriate HOST SELECT switch setting, turn the power to the computer on first, then turn on the Clavinova.

• When not using the [TO HOST] terminal of the Clavinova, make sure the cable is disconnected from the [TO HOST]

terminal. If the cable is left connected, the Clavinova may not function properly.

•“

HS(

” will appear in the display if the host computer is not turned on, the connecting cable is not properly con-

nected, the HOST SELECT switch is not in the proper position, or the MIDI driver or MIDI application is not active. In

this case, turn the power off on both the Clavinova and the computer, and check the cable connection and the

position of the HOST SELECT switch. Once the connection and HOST SELECT switch position is verified, turn the

power of the computer on first, then the Clavinova, to check if the MIDI driver and MIDI application function properly.

• When the HOST SELECT switch is set to “Mac”, “PC-1”, or “PC-2, no data transfer occurs via the MIDI connectors.

To use the MIDI connectors for connection via a standard MIDI interface, set the HOST SELECT switch to “MIDI”.

HOST SELECTTO HOST

MIDIMac

PC-2PC-1

Apple Macintosh

Series Computer

Set to the “Mac” position.

CLP-930

“The Clavinova-Computer Connection” is a supplementary guidebook that describes, for

beginners, what you can do with your Clavinova and a personal computer and how to set up a

Clavinova-Computer system (the manual is not written for any specific models). The document

is available as a PDF file (in English) at the following Internet address:

Clavinova Home Page:

http://www.yamaha.co.jp/english/product/cl/

Yamaha Manual Library (Electronic Musical Instruments)

http://www2.yamaha.co.jp/manual/english/

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-950M Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-950M

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info