Bedienungsanleitung Yamaha CLP-970C (Seite 26 von 36) (Englisch)

593333

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

26 CLP-970

MIDI Data Format

1.7 Polyphonic aftertouch

This message conveys the pressure that is applied to the keyboard after playing a note (for

individual note numbers).

The pressure can be controlled independently for each note. This message will affect cur-

rently-sounding notes.

The effect of this message is determined by the following Multi Part parameters.

1. PAT PITCH CONTROL

2. PAT FILTER CONTROL

3. PAT AMPLITUDE CONTROL

4. PAT LFO PMOD DEPTH

5. PAT LFO FMOD DEPTH

6. PAT LFO AMOD DEPTH

By default, there will be no effect.

The effect will apply to note numbers 36...97.

In the case of either of the following Multi Part parameter settings, that part will not

receive Polyphonic Aftertouch.

• Rcv CHANNEL AFTER TOUCH = OFF

• PART MODE = DRUM, DRUMS1...4

2. System exclusive messages

2.1 Parameter changes

This devices uses the following parameter changes.

[UNIVERSAL REALTIME MESSAGE]

1) Master Volume

[UNIVERSAL NON REALTIME MESSAGE]

1) General MIDI System On

[XG PARAMETER CHANGE]

1) XG System on

2) XG System parameter change

3) Multi Effect1 parameter change

4) Multi Part parameter change

5) Drums Setup parameter change

[MU128 NATIVE PARAMETER CHANGE 2]

1) Current Performance parameter change

[Others]

1) Master tuning

2.1.1 Universal realtime messages

2.1.1.1 Master Volume

11110000 F0H = Exclusive status

01111111 7FH = Universal Real Time

01111111 7FH = ID of target device

00000100 04H = Sub-ID #1 = Device Control Message

00000001 01H = Sub-ID #2 = Master Volume

* 0sssssss SSH = Volume LSB

0ttttttt TTH = Volume MSB

11110111 F7H = End of Exclusive

or,

11110000 F0H = Exclusive status

01111111 7FH = Universal Real Time

0xxxnnnn XNH = Device Number, xxx = don't care

00000100 04H = Sub-ID #1 = Device Control Message

00000001 01H = Sub-ID #2 = Master Volume

0sssssss SSH = Volume LSB

0ttttttt TTH = Volume MSB

11110111 F7H = End of Exclusive

When this is received, the Volume MSB will be reﬂected by the System parameter

MASTER VOLUME.

* The binary expression 0sssssss is expressed in hexadecimal as SSH.

The same applies elsewhere.

2.1.2 Universal non-realtime messages

2.1.2.1 General MIDI System On

11110000 F0H = Exclusive status

01111110 7EH = Universal Non-Real Time

01111111 7FH = ID of target device

00001001 09H = Sub-ID #1 = General MIDI Message

00000001 01H = Sub-ID #2 = General MIDI On

11110111 F7H = End of Exclusive

or,

11110000 F0H = Exclusive status

01111110 7EH = Universal Non-Real Time

0xxxnnnn XNH = N:Device Number, X:don't care

00001001 09H = Sub-ID #1 = General MIDI Message

00000001 01H = Sub-ID #2 = General MIDI On

11110111 F7H = End of Exclusive

When this message is received, the SOUND MODULE MODE is set to XG, and all

MIDI messages deﬁned by GM will be received.

All data except for MIDI Master Tuning will be restored to the default value.

However this message will not be received in any of the following cases.

Since approximately 50[ms] is required in order to process this message, be sure to

allow an appropriate interval before sending the next message.

2.1.3 XG parameter change

This message sets XG-related parameters. Each message can set a single parameter.

The message format is as follows.

11110000 F0H Exclusive status

01000011 43H YAMAHA ID

0001nnnn 1NH N:device Number

01001100 4CH Model ID

0ggggggg GGH Address High

0mmmmmmm MMH Address Mid

0lllllll LLH Address Low

0sssssss SSH Data

: :

11110111 F7H End of Exclusive

For parameters whose Data Size is 2 or 4, the appropriate amount of data will be trans-

mitted as indicated by Size.

2.1.3.1 XG System On

11110000 F0H Exclusive status

01000011 43H YAMAHA ID

0001nnnn 1NH N:device Number

01001100 4CH Model ID

00000000 00H Address High

00000000 00H Address Mid

01111110 7EH Address Low

00000000 00H Data

11110111 F7H End of Exclusive

When On is received, the SOUND MODULE MODE will be set to XG.

Since approximately 50[ms] are required in order to execute this message, please

allow an appropriate interval before transmitting the next message.

2.1.3.2 XG System parameter change

This message sets the XG SYSTEM block (refer to tables <1 -1>, <1 - 2>).

2.1.3.3 Multi Effect1 parameter change

This message sets the MULTI EFFECT1 block (refer to tables <1 - 1>, <1 - 3>).

2.1.3.4 Multi Part parameter change

This message sets the MULTI PART block (refer to tables <1 - 1>, <1 - 4>).

2.1.3.5 Drums Setup parameter change

This message sets the DRUMS SETUP block (refer to tables <1 - 1> , <1 - 5>).

2.1.4 Other parameter changes

2.1.4.1 Master tuning

This message simultaneously modiﬁes the tuning of all channels.

11110000 F0H Exclusive status

01000011 43H YAMAHA ID

0001nnnn 1NH N:device Number

00100111 27H Model ID

00110000 30H Address High

00000000 00H Address Mid

00000000 00H Address Low

0000mmmm 0MH Master Tune MSB

0000llll 0LH Master Tune LSB

0xxxxxxx XXH don't care

11110111 F7H End of Exclusive

Normally, the XG SYSTEM message MASTER TUNE should be used (refer to table <1-2>).

2.2 Bulk dump

This device uses the following bulk dump messages.

[XG BULK DUMP]

1) XG System bulk dump

2) Multi Effect1 bulk dump

3) Multi Part bulk dump

4) Drums Setup bulk dump

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-970C Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-970C

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info