Bedienungsanleitung Yamaha CLP-970M (Seite 97 von 114) (Englisch)

593334

Zoom out

Zoom in

Vorherige Seite

1/114

Nächste Seite

CLP-970 97

Questions about Operations

and Functions

■ The buttons do not respond.

While you are using a function, some buttons not

used for the function are disabled. If the song is

playing, stop the playback. Otherwise, press the

[EXIT] button to return to the main screen. Then,

perform the desired operation.

■

The sound sustains and does not decay when I

press the sostenuto pedal.

With the voices in the ORGAN or STRINGS/

CHOIR group, the sound continues sustaining

while you are holding down the sostenuto pedal.

■

Higher or lower notes does not sound correctly

when the transpose or octave setting is made.

The setting range for the transposition and octave

setting is C2 - G8. (With the normal setting, the

Clavinova’s 88 keys covers the range of A1 - C7.) If

the lowest key is set to a note lower than C2, it will

produce a sound one octave higher. If the highest

key is set to a note higher than G8, it will produce a

sound one octave lower.

■

How can I return to the recording or song select

screen during song recording or playback?

Press one of the SONG SELECT [ ] and [ ]

buttons once.

■

The tempo does not change even though I

recorded with tempo changes.

Depending on the timing of tempo changes, the

changed tempo may not be recorded. In this case,

the recording will be played back at the original

tempo.

Make tempo changes when the recording track is

selected and a red track indicator is ﬂashing. The

same trick applies to editing the tempo after record-

ing.

■

Performance in Dual or Split mode is not

recorded.

Track data is lost unexpectedly.

For Dual or Split mode recording, the recording

track for the second voice (that is, the voice for the

left-hand part) is automatically assigned (page 48).

Therefore, if the track already has data, the data will

be overwritten during recording. Also, switching to

Dual mode or Split mode in the middle of the song

is not recorded. Therefore, the notes you played

with the second voice (or the notes lower than the

Split point) are not recorded.

■

What type of data is recorded?

Data recorded in the tracks:

• Note data (notes you play)

• Voice selection

• Clavinova pedals and external pedals on/off

• Reverb depth “ReverbSend”

• Chorus depth “ChorusSend”

• Variation effect depth “VariationSend”

• Voice octave setting “Octave”

• Voice volume level “Volume”

• Stereo image of each voice “Pan”

• Fine tuning of two voice pitch (Dual mode)

“Detune”

• Volume level changes for each voice with

response to the way you play “TouchSense”

Data recorded globally in all tracks:

•Tempo

• Time signature

•Reverb type

• Chorus type

• Variation effect type

You can change all data except for note data after record-

ing.

You can change the time signature at the beginning of the

song, or at a position in the song to which you move, by

using the B [–]/[+] buttons while the song is stopped.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-970M Seite 97

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-970M

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info