Bedienungsanleitung Yamaha CLP-990M (Seite 23 von 36) (Englisch)

593336

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

CLP-990

MIDI Data Format

XG sound source

1. Channel messages

1.1 Note on/note off

These messages convey keyboard performance data.

Range of note numbers received = 0 (C-2)...60 (C3)...127 (G8)

Velocity range = 1...127 (Velocity is received only for note-on)

When the Multi Part parameter "Rcv NOTE MESSAGE" = OFF, that part will not receive

these messages.

For a drum part*, key-off is not received if the DrumSetup parameter Rcv NOTE OFF =

OFF.

For a drum part, key-on is not received if the DrumSetup parameter Rcv NOTE ON = OFF.

* Drum Part indicates that the Multi Part parameter PART MODE is “set to DRUM,

DRUMS1, DRUMS2.”

1.2 Control changes

These messages control volume or pan etc.

Their functions are differentiated by the control number (Ctrl#).

If the Multi Part parameter Rcv CONTROL CHANGE = OFF, that part will not receive

control changes.

1.2.1 Bank Select

This message selects the voice bank.

Control# Parameter Data Range

0 Bank Select MSB 0, 64, 126, 127 (Normal voice, SFX voice, SFX kit,

Drum kit)

32 Bank Select LSB 0...127

The Bank Select data will be processed only after a Program Change is received, and then

voice bank will change at that time.

If you wish to change the voice bank as well as the voice, you must transmit Bank Select

and Program Change messages as a set, in the order of Bank Select MSB, LSB, and Pro-

gram Change.

1.2.2 Modulation

This message is used primarily to control the depth of vibrato, but the depth of the follow-

ing 7 types of effect can be controlled.

The effect of this message can be changed by the following parameters.

• Multi Part Parameter

1. MW PITCH CONTROL

2. MW FILTER CONTROL

3. MW AMPLITUDE CONTROL

4. MW LFO PMOD DEPTH

5. MW LFO FMOD DEPTH

6. MW LFO AMOD DEPTH

• Effect1 Parameter

7. MW VARIATION CONTROL DEPTH

(Valid when Variation Effect is assigned to a part as Insertion)

By default, an LFO Pitch Modulation (PMOD) effect will apply.

Control# Parameter Data Range

1 Modulation 0...127

If the Multi Part parameter Rcv MODULATION = OFF, that part will not receive Modula-

tion.

1.2.3 Portamento Time

This message controls the degree of Portamento (refer to 1.2.9).

Control# Parameter Data Range

5 Portamento Time 0...127

When Portamento (control number 065) is ON, this regulates the speed of the pitch

change.

A value of 0 is the shortest portamento time, and 127 is the longest portamento time.

If the receive channel is a drum part, Portamento Time is not received.

1.2.4 Data Entry

This message sets the value of the parameter which was speciﬁed by RPN MSB/LSB (see

1.2.22) and NRPN MSB/LSB (see 1.2.21).

Control# Parameter Data Range

6 Data Entry MSB 0...127

38 Data Entry LSB 0...127

1.2.5 Main Volume

This message controls the volume of each part.

This is used to adjust the volume balance between parts.

Control# Parameter Data Range

7 Main Volume 0...127

When the Multi Part parameter Rcv VOLUME = OFF, that part will not receive Main Vol-

ume.

With a value of 0 there will be no sound, and a value of 127 will be the maximum volume.

1.2.6 Panpot

This message control the panning (stereo location) of each part.

Control# Parameter Data Range

10 Pan 0...64...127

When the Multi Part parameter Rcv PAN = OFF, that part will not receive Panpot.

0 is left, 64 is center, and 127 is right.

1.2.7 Expression

This message controls expression (dynamics within a musical line) for each part.

It is used to create volume changes during a song.

Control# Parameter Data Range

11 Expression 0...127

If the Multi Part parameter Rcv EXPRESSION = OFF, that part will not receive Expres-

sion.

1.2.8 Hold1

This message controls sustain pedal on/off.

Control# Parameter Data Range

64 Hold1 0...63,64...127 (OFF, ON)

When this is ON, currently-sounding notes will continue to sound even if note-off mes-

sages are received.

If the Multi Part parameter Rcv HOLD1 = OFF, that part will not receive Hold1.

1.2.9 Portamento

This message controls portamento on/off.

Control# Parameter Data Range

65 Portamento 0...63, 64...127 (OFF, ON)

When this is ON, the pitch will change smoothly between notes. The time over which the

pitch changes is adjusted by Portamento Time (see 1.2.3). Also, when the Multi Part

parameter MONO/POLY MODE = MONO, the tone will also change smoothly (legato) if

Portamento = ON.

If any of the following Multi Part parameter settings apply, that part will not receive Porta-

mento.

• Rcv PORTAMENTO = OFF

• PART MODE = DRUM, DRUMS1, DRUMS2

1.2.10 Sostenuto

This message controls sostenuto pedal on/off.

Control# Parameter Data Range

66 Sostenuto 0...63,64...127 (OFF, ON)

If sostenuto is turned on while a note is sounding, that note will be sustained until soste-

nuto is turned OFF.

If the Multi Part parameter Rcv SOSTENUTO = OFF, that part will not receive Sostenuto.

1.2.11 Soft Pedal

This message controls soft pedal on/off.

Control# Parameter Data Range

67 Soft Pedal 0...63, 64...127 (OFF, ON)

The sound will become mellower when Soft Pedal is ON.

If any of the following Multi Part parameter settings apply, that part will not receive the

Soft Pedal.

• Rcv SOFT PEDAL = OFF

• PART MODE = DRUM, DRUMS1, DRUMS2

1.2.12 Harmonic Content

This message adjusts the resonance of the ﬁlter that is speciﬁed for the sound.

Control# Parameter Data Range

71 Harmonic Content 0...64...127 (-64...0...+63)

Since this is a relative change parameter, it speciﬁes a boost or cut relative to 64.

Higher values will produce a more distinctive sound.

For some sounds, the effective range may be less than the possible range of settings.

1.2.13 Release Time

This message adjusts the EG release time that was speciﬁed by the sound data.

Control# Parameter Data Range

72 Release Time 0...64...127 (-64...0...+63)

Since this is a relative change parameter, it speciﬁes an increase or decrease relative to 64.

Increasing this value will lengthen the release that follows a note-off.

Yamaha CLP-990M Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-990M

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info