Bedienungsanleitung Yamaha CLP-S408PE (Seite 31 von 96) (Englisch)

593340

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Advanced Functions

Playing back Songs

3. Start playback.

Press the [PLAY/PAUSE] button to start playback.

After playback starts, the measure number (in the case of MIDI Songs)

which is being played or playing time (in the case of Audio Songs) is shown

on the display.

You can play the keyboard along with Song playback. You can also change

the Voice for your keyboard performance.

Adjusting the tempo (MIDI Songs)

Press the [TEMPO/FUNCTION] button so that the TEMPO lamp lights,

then use the [TEMPO/FUNCTION  ] buttons. The original tempo of

the current Song can be recalled by pressing the [] and [] buttons

simultaneously.

Pause

Pressing the [PLAY/PAUSE] button will stop playback at the current

position. Pressing the [PLAY/PAUSE] button again will start playback

from that position.

Rewind/Fast forward

Pressing the [-/NO] or [+/YES] button will move back or forth through the

bars during playback or while playback is paused.

4. Stop playback.

Press the [STOP] button to stop playback.

If you select a Song number in step 2 above, the Song stops automatically

when the Song is played back to the end.

NOTE

• The metronome can be used

during playback. The

metronome will automatically

stop when playback is stopped.

• Audio Song playback volume

can be adjusted in the Function

mode (page 51).

• When selecting a Song turns off

the both the [RIGHT] and

[LEFT] lamps, the selected

Song has no data and cannot

be played back.

• When playing an audio Song,

the number on the left

represents minutes and the two

numbers on right represent

seconds. If playback lasts 10

minutes or longer, the tens digit

is not shown (for example, 12

minutes would be shown as

“2.00”).

NOTE

When a different Song is selected

via “rnd,” “ALL” or manually, the

original tempo for the selected

Song will be called up.

MIDI Song Audio Song

Current measure number Playing time

NOTE

• When a different Song is

selected via “rnd,” “ALL” or

manually, the appropriate

Reverb and Effect types will be

selected automatically.

• Song data is not transmitted via

MIDI. However, channels 3 – 16

will be transmitted via MIDI

when the Song channel

selection is set to “1&2” in the

Function mode (page 51).

• When playing back MIDI Songs

containing Voices that are

incompatible with this

instrument (such as XG or GM

Songs), the Voices may not

sound as intended on the

original. If such a case occurs,

set the Song Play Channel (in

Function; page 51) to 1&2. By

muting the channels 3 to 16 via

this setting, you may hear the

original sound of the Song, as

long as the piano sound is

assigned to channels 1 and 2.

• If the Song cannot be selected

or loaded, you may need to

change the character code in

the Function mode (page 51).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP-S408PE Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP-S408PE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info