Bedienungsanleitung Yamaha CLP230 (Seite 30 von 90) (Englisch)

27512

Zoom out

Zoom in

Vorherige Seite

1/90

Nächste Seite

Recording Your Performance

CLP-240/230 Owner’s Manual

ENGLISH

2. Engage Record Ready mode.

Press the [REC] button to engage Record Ready mode. This automatically selects

an empty song for recording and makes the RIGHT part active. If an empty

song does not exist, Song U01 will be selected. Recording does not actually start

yet.

The amount of memory available for recording will be shown on the LED dis-

play in approximate kilobytes. The SONG [PLAY/PAUSE] indicator will ﬂash at

the current METRONOME tempo setting.

You can turn on the metronome in this step, and adjust the tempo by using the

[TEMPO/FUNCTION# ▼, ▲] buttons. (Range: 32-280)

Record Ready mode can be disengaged before recording by pressing the [REC]

button again.

3. Start recording.

Recording will begin automatically as soon as you play a note on the keyboard

or press the SONG [PLAY/PAUSE] button. The current measure’s number will

appear on the display while recording.

4. Stop recording.

Press either [REC] or SONG [STOP] button to stop recording. When recording is

stopped, dashes appear in the display in succession to indicate that the recorded

data is being saved to the instrument automatically. After the data is saved, the

song name (U01-U03) appears in the display. The recorded part’s indicator will

glow green to indicate that it now contains data. (Record mode is disengaged

automatically.)

CAUTION

Do not turn off the power of the instrument when dashes appear in the display in suc-

cession. Doing so may delete all song data in the instrument, including external songs

(page 40).

5. Play back the recorded performance.

Press the SONG [PLAY/PAUSE] button to play back the recorded performance.

To stop playback in the middle of a song, press the SONG [STOP] button.

NOTE

The amount of memory avail-

able for recording:

This value in kilobytes (a unit

used of measurement for data)

indicates how much space

remains available for recording on

the Clavinova. You can record up

to a maximum of about 11,000

notes on the CLP-240/230

depending on pedal usage and

other factors.

NOTE

If you have selected the LEFT

part previously in the same song,

the LEFT part will automatically

be made active when pressing

the [REC] button in step 2.

NOTE

If the metronome was on when

you started recording, you’ll be

able to keep time with the metro-

nome while recording, but the

metronome sound will not be

recorded.

NOTE

For more recording information,

see page 33.

NOTE

The left pedal can be assigned to

start recording via the “Left Pedal

Mode” function described on

page 51.

NOTE

The record part indicator will

begin to ﬂash when the recorder

memory is almost full. If the mem-

ory becomes full during record-

ing, “Full” will appear on the

display and recording will stop

automatically. (All recorded data

up to that point will be retained.)

NOTE

Pressing the SONG [PLAY/

PAUSE] button to start recording,

then pressing the SONG [STOP]

button to stop recording will erase

all previously- recorded data on

the selected part.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP230 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP230

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info