Bedienungsanleitung Yamaha CLP555 (Seite 22 von 54) (Englisch)

27534

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

Using the Recorder

Start Recording................................................................................................

Recording will begin automatically as soon as you play a note on the

keyboard or press the [START/STOP] button. The current measure

number will appear on the display while recording.

• The left pedal can be assigned to start and stop recording via the “Left

Pedal Mode” function described on page 27.

• If the metronome was on when you started recording, you’ll be able to

keep time with the metronome while recording, but the metronome sound

will not be recorded.

• You can record up to a maximum of about 4,200 notes, depending on

pedal usage and other factors. The record track indicators will begin to

flash when recorder memory is almost full. If the memory becomes full

during recording, “FUL” will appear on the display and recording will stop

automatically.

START



STOP

REC

RECORDER

Stop Recording ................................................................................................

Press either the RECORDER [REC] or [START/STOP] button to

stop recording.

The indicator of the recorded track will glow green to indicate that it

now contains data.

Erasing a Single Track..............................................................................

All data can be erased from either of the recorder’s tracks by engag-

ing the record mode, selecting the track you want to erase, and then

pressing the [START/STOP] button twice without recording any data.

Changing the Initial Settings.............................................................

The initial voice (including dual mode), damper pedal, soft pedal,

tempo, reverb type, reverb depth, and effect settings made in step 1 of the

recording procedure are actually recorded by the CLP-555. These initial

settings can be changed after the recording is finished by pressing the

[REC] button to engage the record ready mode, pressing the appropriate

track button, making the required changes, and then pressing the [REC]

button again to exit from the record ready mode and register the changes.

If you do this, be careful not to press the [START/STOP] button or a key

on the keyboard, either of which will start recording and erase all previ-

ous recorded data on the selected track. It is possible to cancel the

operation even after changes have been made: change tracks and then

press the [REC] button to exit from the record mode (this also cancels

data for the entire song).

•

The initial data of the “Dual mode functions (F3)” or “Split mode functions

(F4)” cannot be changed.

START



STOP

REC

RECORDER

Press twice.

START



STOP

REC

RECORDER

START



STOP

REC

RECORDER

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CLP555 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CLP555

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info