Bedienungsanleitung Yamaha CP40 STAGE (Seite 18 von 60) (Englisch)

588665

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

18 CP4 STAGE/CP40 STAGE Owner’s Manual

Setting Up

Auto Power-Off

The Auto Power-Off function automatically turns off your

stage piano after a certain period of inactivity, which is

approximately 30 minutes by default.

If you would like to disable this function, turn off the stage

piano once and then turn it back on while holding down

the leftmost key on the keyboard. The message “Auto

power off disabled” will be displayed on-screen, and this

function will remain disabled until you set a new Auto

Power-Off time.

If necessary, use the following procedure to set the time

until the Auto Power-Off function turns off the stage piano.

Press [UTILITY]; select 01: General using [u] and press

[ENTER]; select AutoOff using [d]; set the desired time

using [-1/NO] and [+1/YES] or the Data Dial; press

[STORE].

NOTICE

• The stage piano remains charged and draws a small

amount of power even when turned off by the Auto Power-

Off function. To shut it down completely, therefore, unplug

it from the wall outlet.

• In certain modes of operation such as when data has been

edited, the Auto Power-Off function may not turn off the

stage piano when the set period of inactivity has elapsed.

We recommend, therefore, that you always turn off the

instrument manually when you are finished using it.

• If your stage piano is connected to other equipment such

as amplifiers, speakers, or a computer, but you do not

intend to use it for some time, we recommend that you

turn off all devices as described in their owner’s manuals.

Doing so eliminates the risk of damage to the other

equipment. If you do not want the stage piano to turn off

automatically when connected to other equipment, disable

the Auto Power-Off function.

• Any unsaved data will be lost when the Auto Power-Off

function turns off the stage piano. Be sure, therefore, to

store your work before it does so.

• If the stage piano’s AutoOff parameter is set to “off”, that

setting will be retained when you import system data that

was saved externally, regardless of the Auto Power-Off

setting contained in that data. If, however, a specific Auto

Power-Off time has been set using the AutoOff parameter

and system data is imported, the Auto Power-Off setting

contained in that data will be applied.

• It should be noted that executing the Factory Set function

(page 43) will cause the Auto Power-Off time to revert to

the default setting of 30 minutes.

NOTE

• Settings for the Auto Power-Off function do not represent exact

times and there may be some variation.

• When the Auto Power-Off function has turned off the instrument,

you will first need to return the [P] switch to the Off (N) position in

the case of the CP4 STAGE or the Standby (N) position in the

case of the CP40 STAGE before turning it back on.

Adjusting Volume and LCD

Contrast

While playing your stage piano, you can adjust the output

volume either on the instrument itself or via your keyboard

amplifiers or powered speakers. The stage piano’s

volume is adjusted using the [MASTER VOLUME] dial.

Set the instrument’s volume to close to 70% of the

maximum, and then raise the volume on the keyboard

amplifiers or powered speakers by an appropriate

amount.

NOTE The stage piano’s [MASTER VOLUME] dial cannot be used

to adjust the volume of audio being input via the [AUX IN]

jack (page 45).

CAUTION

To prevent hearing loss, avoid using headphones at high

volumes for extended periods of time.

If you find it difficult to read the on-screen text, you can

adjust the LCD contrast using the [-1/NO] and [+1/YES]

buttons with the [UTILITY] button held down.

NOTE The Contrast parameter on the General screen from the

Utility area can also be used to adjust the LCD contrast as

described above. Refer to the Reference Manual (pdf) for

details.

70%

LoudestQuietest

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CP40 STAGE Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CP40 STAGE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info