Bedienungsanleitung Yamaha CP40 STAGE (Seite 40 von 60) (Englisch)

588665

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

40 CP4 STAGE/CP40 STAGE Owner’s Manual

Quick Start Guide

4 Set the name of the file as required, and then

press the [ENTER] button.

For details on how to set a name, refer to Entering text

(page 20) from the Basic Operations & Display

Content section.

The following confirmation message will be displayed

before data is saved.

Press the [-1/NO] button if you do not wish to

proceed. In addition, you can also return to the

Performance screen by pressing the [EXIT] button

several times.

5 Press the [+1/YES] button.

The data will be saved. To cancel saving, press the

[EXIT] button while the “Now saving...” message is

displayed.

6 Press the [EXIT] button the required number

of times to exit the File area.

Loading a file from a USB flash-

memory device

As described below, you can use the Load function to

read a file from the connected USB flash-memory device

into the instrument.

NOTE The Load function can only be used with All-type files (which

have a .C7A (CP4 STAGE) or .C8A (CP40 STAGE) file

extension). If you wish to read an audio file (.WAV), refer to

the description of the Audio Playback screen (page 36).

1 Plug the USB flash-memory device into the

[TO DEVICE] USB terminal on the rear panel.

2 Press the [FILE] button.

The File menu will be displayed.

3 Use the [u] and [d] buttons to select

02: Load, and then press the [ENTER] button.

If the USB flash-memory device’s root directory

contains an All-type file, it will be displayed on-

screen.

NOTE If no All-type file exists in the USB flash-memory

device’s root directory*, the instrument will display the

message “File not found” instead of the Load screen.

(*: The directory initially displayed when you open the

USB flash-memory device on a computer or the like.)

4 Ensure that the cursor (R) is located at the

File parameter, select the file you wish to load

using the Data Dial, and press the [ENTER]

button.

5 Select which data from the selected file to

load into the instrument (i.e., the load type)

using the Data Dial, and then press the

[ENTER] button.

You can choose to load all of the data (“All”), to load

all of the data with the exception of Utility settings (“All

without Sys”), or to load a specific Performance

(“Performance”).

“Performance” selected as load type:

A screen for selecting the specific Performance to

load will be displayed.

“All” or “All without Sys” selected as load

type:

The following confirmation message will be displayed

before loading.

6 If you selected “Performance” as the load

type in Step 5, select the specific

Performance to load using the Data Dial, and

then press the [ENTER] button.

If you selected “All” or “All without Sys”, skip to Step

A screen for selecting a destination for the

Performance to be loaded will be displayed.

Are you

[NO]

sure?

/[YES]

FILE

D01:Save

FILE

Load

Type File

All RSTAGE_01

File name

FILE

Load

Type File

All RSTAGE_03

Load type

FILE

Load

Src Performance

R001(A0l)CFX Grand

Are you

[NO]

sure?

/[YES]

FILE

Load

Dst Performance

R004(A04)S6+Pad 1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CP40 STAGE Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CP40 STAGE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info