Bedienungsanleitung Yamaha CP40 STAGE (Seite 43 von 60) (Englisch)

588665

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

CP4 STAGE/CP40 STAGE Owner’s Manual 43

Quick Start Guide

Changing the master tuning

You can adjust the tuning of the stage piano as a whole

as described below.

1 Press the [UTILITY] button.

The Utility menu will be displayed.

2 Use the [u] button to select 01: General, and

then press the [ENTER] button.

The pane for setting the master tuning will be

displayed.

3 Move the cursor (R) to the MasterTune

parameter using the [

l] button, and then

change its setting using the Data Dial.

The master tuning can be set in units of one cent.

NOTE The stage piano’s default tuning is 440 Hz (for A3), and

3 to 4 cents is roughly equivalent to 1 Hz.

4 Press the [STORE] button.

All Utility settings will be stored in the stage piano’s

memory.

Restoring initial settings

As described below, the Factory Set function can be

used to restore your stage piano’s User Memory to its

initial condition. When executed, all Performances and

Utility settings stored in User Memory will be returned to

their defaults. This can prove useful when you have

accidentally overwritten some of the User Memory’s

default Performances and Utility settings.

NOTICE

When the Factory Set function is executed, all Performances

and Utility settings currently stored in User Memory will be

overwritten with their defaults. It is wise, therefore, to

regularly create backup copies of important data on a USB

flash-memory device or the like (page 39).

1 Press the [UTILITY] button.

The Utility menu will be displayed.

2 Use the [d] button to select 07: Job, and then

press the [ENTER] button.

The Utility Job menu will be displayed.

3 Use the [u] button to select 01: FactorySet,

and then press the [ENTER] button.

The Factory Set screen will be displayed.

4 Set the PowerOn Auto parameter to “off”, and

then press the [ENTER] button.

The following confirmation message will be displayed

before executing the Factory Set function.

Press the [-1/NO] button if you do not wish to

proceed. In addition, you can also return to the

Performance screen by pressing the [EXIT] button

several times.

NOTICE

If you set the PowerOn Auto parameter to “on” before

executing the Factory Set function, the function will then

execute automatically whenever you subsequently turn

on your stage piano. As this can result in the loss of

important settings and data, we recommend that the

parameter normally be set to “off”. When you return the

PowerOn Auto parameter from “on” to “off”, you must

execute the Factory Set function in this condition to

store the new setting.

5 Press the [+1/YES] button.

The Factory Set function will be executed.

NOTICE

You should never turn off the stage piano while the

Factory Set function is executing — that is, while the

message is displayed on-screen. If this precaution is not

observed, the content of User Memory may be lost and

system data may become corrupted, preventing the

instrument from operating normally the next time it is

turned on.

6 Press the [EXIT] button the required number

of times to exit the Utility area.

UTILITY Ma

General

sterTune Trnsps

0/440

0Hz + 0

UTILITY JOB

D01:FactorySet

Job

FactorySet

PowerOn Auto

Roff

Are you

[NO]

sure?

/[YES]

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CP40 STAGE Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CP40 STAGE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info