Bedienungsanleitung Yamaha CP50 (Seite 12 von 68) (Englisch)

516893

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Control Panel

12 CP5/CP50 Owner’s Manual

Component Names & Functions

[RR ] (Fast Forward) button

Whenever you are using a Preset Drum Pattern or a User

Song as the backing track, pressing this button will move the

play position forward by one measure at a time. Alternatively,

if you are using a Wave file as the backing track, pressing this

button will move the play position forward by one second at a

time. Press and hold the button to fast-forward continuously.

[J] (Stop) button

This button is used to stop recording or playback.

[R/K] (Play / Pause) button

This button is used to start recording or playback. In addition,

if playback is underway, this button can be pressed to pause

it. Pressing this button when recording is underway ends the

recording.

*Display

Using the display, you can confirm system messages, set

parameters, and perform a range of other operations.

(Knobs 1 to 3 (page 27)

Numbered 1 to 3 from left to right, these knobs can be

turned to control the parameters assigned to them. On each

different parameter setting page, furthermore, a different set

of parameters or operations is assigned to the knobs, and

they can be turned or pressed to set the parameters or

perform the operations.

A[L PAGE] and [PAGER] buttons (page 19)

Press these left and right buttons within a parameter setting

screen that comprises a number of different pages in order

to navigate between them.

B[EXIT/jump to edit] button (pages 21, 34)

Press this button to return to the Performance screen from

the parameter setting screen for the currently selected block

(page 31), from the Utility screen, or from the File screen.

Furthermore, by pressing the [PRE-AMP] button, the [MOD-

FX] button, the [PWR-AMP] button, the [REVERB] button, the

[MASTER COMPRESSOR] button, or a part button while

holding down the [EXIT/jump to edit] button, you can jump

directly to the corresponding parameter setting screen. You

can also press the [STORE/ASSIGN] button while holding

down the [EXIT/jump to edit] button to call up the screen for

assigning parameters to Knobs 1 to 3.

C[ENTER] button

Press this button to register settings and perform a range of

other operations.

D[UTILITY] button

Press this button to call up the Utility screen. The lamp to the

top-left of the button lights up whenever this screen is being

displayed. In addition, you can hold down the [UTILITY]

button and press the [FILE] button (or vice versa) to open

the Demo Song screen.

E[FILE] button (page 52)

Press this button to call up the File screen.

FNumber buttons [1] to [10]

Press the Number buttons to select different Performances

within the currently-selected memory bank. The number of

the currently selected Performance is indicated by lighting of

the lamp to the top-left of the corresponding button. When

this lamp flashes, meanwhile, it will indicate that selection of

a new Performance has started but not yet been completed.

Furthermore, whenever a parameter setting screen

comprising a number of different pages is displayed, the

Number buttons can also be used to jump quickly to the

corresponding page. At this time, the currently selected

page is indicated by flashing of the lamp to the top-left of the

corresponding button.

GBank buttons

Press the [PRE], [USER], or [EXT] button to select the Preset

Performance memory area, the User Performance memory

area, or an External Performance memory area, respectively.

Each of these areas comprises three individual memory

banks — for example, PRE1, PRE2, and PRE3 in the case of

the Preset Performance memory area. You can select these

banks by pressing the corresponding button ([PRE], [USER],

or [EXT]) as many times as required. Furthermore, you can

also jump directly to the first bank in the selected area —

namely, PRE1, USR1, or EXT1 — by holding down the [EXIT]

button and pressing the corresponding Bank button. When

the lamp to the top-left of a Bank button flashes, it will

indicate that selection of a new Performance has started but

not yet been completed.

HGroup buttons [A] to [D]

Press the [A], [B], [C], or [D] button to select the

corresponding group within the current Performance

memory bank. When the lamp to the top-left of a Group

button flashes, it will indicate that selection of a new

Performance has started but not yet been completed.

Furthermore, whenever a parameter setting screen

comprising a number of different pages is displayed, the

Group buttons can also be used to jump quickly to the

corresponding page. At this time, the currently selected

page is indicated by flashing of the lamp to the top-left of the

corresponding button.

I[TRANSPOSE] button (page 30)

Press this button to call up the Transpose screen. The lamp

to the top-left of the button lights up whenever this screen is

being displayed.

[MASTER COMPRESSOR] button (

pages

30, 31, 36)

Press this button to toggle the Master Compressor on and

off. The lamp to the top-left of the button lights up whenever

this block is activated. Furthermore, if you press and hold

this button (for at least one second), the Master

Compressor’s parameter setting screen will be displayed,

and the lamp will begin to flash. Even if this parameter

setting screen is being displayed, the Master Compressor

can still be toggled on and off by pressing the button. It

should be noted that the [MASTER COMPRESSOR] button’s

lamp will flash in one of two different ways to indicate

whether the block is on or off; specifically, the lamp stays lit

longer when the block is on, and it stays off longer when the

block is off.

K[MASTER EQUALIZER] knobs (page 30)

Turn these knobs to adjust the tone of all sound output by

your CP5 or CP50. The CP5 features five knobs for adjusting

the gain in individual frequency bands — namely, the [LOW],

[LOW MID], [MID], [HIGH MID], and [HIGH] knobs.

Meanwhile, the CP50 has three such knobs — [LOW], [MID],

and [HIGH]. The same adjustments can be performed using

the corresponding parameters from the Utility screen. (See

the Reference Manual pdf document for more details.)

LUSB TO DEVICE port (page 25)

USB flash-memory devices can be plugged into the CP5 via

this port.

CP5 only

Yamaha CP50 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CP50

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info