Bedienungsanleitung Yamaha CS1X (Seite 24 von 64) (Englisch)

48730

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

To start the Arpeggiator, press the ARPEGGIATOR button to turn it

on. A [▼] mark will appear in the LCD above the word

"ARPEGGIATOR".

To turn the Arpeggiator off, press the ARPEGGIATOR button

again.

TYPE: Sets the type of arpeggio. You can choose from 30 types.

For details about each type, see the Arpeggiator Type List in the

"Data List" book.

Arpeggiator Hold

The Arpeggiator Hold function lets you play a chord to start the

automatic arpeggio, then take your hand off the keyboard; the

arpeggiated chord will play continuously in a loop. Play another

chord and the automatic arpeggios will change accordingly.

To activate the Arpeggiator Hold function, perform the following:

1. Hold SHIFT and press ARPEGGIATOR. The Arpeggiator indicator in

the LCD will start blinking.

2.Play a series of chords.

3.To stop the arpeggiated chords, press ARPEGGIATOR again.

Arpeggiator Split

If you hold SHIFT and press the Parameter Value [UP] button when

the TYPE parameter is displayed in the LCD, the Arpeggiator Split

function will be enabled, and a reversed type letter "S" will appear

to the right of the Arpeggiator type.

The Split function splits the keyboard from C3 (indicated above the

keyboard with [▼]) and will allow you to play the arpeggiated chords

on the lower half (below C3) of the keyboard, and play a melody line on

the upper half (C3 and above).

To cancel the Split function, hold SHIFT and press the Parameter

Value [DOWN] button.

TEMPO: Sets the tempo of the Arpeggiator. The range is MIDI, 40

~ 240.

Settings:

TEMPO: MIDI, 40 ~ 240 (beats per minute)

If you want to synchronize the tempo of the Arpeggiator

with that of an external MIDI device, set the TEMPO parameter to MIDI.

SUBDIVIDE: Determines the basic note settings (how fine the

tempo is divided) of the Arpeggiator.

The Arpeggiator data cannot be output as the MIDI messages.

NOTE

Settings:

SUBDIVIDE: 3/8= , 1/4= , 3/16= , 1/6= , 1/8= , 3/32= ,

1/12= , 1/16= , 1/24= , 1/32=

NOTE

■ PERFORM LEVEL

This sets the volume of each Performance.

Settings:

PERFORM LEVEL (Performance Level): 0~127

■ EFFECT

There are five effect parameters: REV TYPE (Reverb Type), CHO

TYPE (Chorus Type), VARI TYPE (Variation Type), VARI PARAM

(Variation Parameter) and VARI DATA (Variation Data).

For more basic information on each effect, see page 47.

REV TYPE (Reverb Type): Sets the Reverb type. You can choose

from 11 types. For more information about each Reverb type, see

Effect Type List on page 49.

CHO TYPE (Chorus Type): Sets the Chorus type. You can choose

from 11 types. For more information about each Chorus type, see

Effect Type List on page 49.

VARI TYPE (Variation Type): Sets the Variation effect type. There are

43 types to choose from. For more information about each Variation

effect type, see Effect Type List on page 49.

VARI PARAM (Variation Parameter): Selects the Variation effect

parameters. Parameters will differ depending on the Variation

effect type selected in VARI TYPE.

Reverb Type Chorus Type

Variation Parameter

Variation Type

Variation Data The letter "P" (Parameter) or "d"

(Data) displays to distinguish

between the Variation Parameter

and Variation Data screens.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CS1X Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CS1X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info