Bedienungsanleitung Yamaha CS1X (Seite 44 von 64) (Englisch)

48730

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

■

ASSIGN CTRL NO (Assign Control Change Number)

This lets you assign Control Change Numbers to controllers such

as the Modulation Wheel or Sound Control Knobs. This is mainly

used to control external devices connected via MIDI.

The main function of the Sound Control Knobs will not be

changed.

You can designate whether the Modulation Wheel or the Foot

Controller is used for Scene Control (page 16).

Following are the Control Change Numbers and Names that can

be assigned to the various controllers:

In the Scene Control settings, you can choose from Mod.

Wheel (Modulation Wheel) or FootCtrl (Foot Controller).

General Purpose: With the CS1x, General Purpose 1 is for FC,

2 for knob 3 (ASSIGN1), 3 for knob 6 (ASSIGN2) and 4 for no setting.

NOTE

Control Change Number Name LCD

1 Modulation Wheel Mod.Whl

5 Portament Time PortaTm

6 Data Entry MSB DataMSB

7 Main Volume MainVol

10 Panpot Panpot

11 Expression Expres.

16 General purpose1 Generl1

17 General purpose2 Generl2

18 General purpose3 Generl3

19 General purpose4 Generl4

38 Data Entry LSB DataLSB

64 Hold 1(Damper/Sustain) Hold1

65 Portament Switch PortaSW

66 Sostenute Sostnut

67 Soft Pedal Soft

71 Harmonic Contents Harmonic

72 Release Time RelTime

73 Attack Time AtkTime

74 Brightness Bright.

84 Portament Control PortaCt

91 Reverb Depth Reverb

93 Chorus Depth Chorus

94 Variation Depth Vari

Others ------- -------

Assignable Control Change Numbers and Names

Scene

SCENE 1 or 2 buttons (only for the Scene Control)

NOTE

Controller LCD

Modulation Wheel MW

Sound Control Knob 1 (ATTACK) Knob1

Sound Control Knob 2 (RELEASE) Knob2

Sound Control Knob 3 (ASSIGN 1/DATA) Knob3

Sound Control Knob 4 (CUTOFF) Knob4

Sound Control Knob 5 (RESONANCE) Knob5

Sound Control Knob 6 (ASSIGN 2) Knob6

Footswitch connected to the FOOTSWITCH jack on the rear panel FS

Foot Controller connected to the FOOT CONTROLLER jack on the rear panel FC

Foot Volume pedal connected to the FOOT VOLUME jack on the rear panel FV

Control Change Number Name

Controller

NOTE

Assigning the Controllers

1.Move the controller on the panel to which the Control Change

Number is to be assigned. The parameters of the controller

will appear in the LCD.

Press the SCENE1 or SCENE 2 button to display the Scene

Control parameters.

2.Press the Parameter Value UP/DOWN button to select the

Control Change Number and Name.

3.Repeat steps 1 and 2 to assign the Control Change Numbers

and Names to each controller.

This function is convenient for controlling an external MIDI

device with the CS1x. For details, see page 53.

■Tips About the Sound Control Knobs

The changes made by the Sound Control Knobs can be output as

the MIDI messages.

The MIDI messages output via MIDI OUT can be assigned using the

ASSIGN CTRL NO function shown at the left.

The assignments set at the factory:

Sound Control Knob 1 73: Attack Time

Sound Control Knob 2 72: Release Time

Sound Control Knob 3 17: General purpose2

Sound Control Knob 4 74: Brightness

Sound Control Knob 5 71: Harmonic Contents

Sound Control Knob 6 18: General purpose3

• When the CS1x receives the data assigned to each Knob from an

external MIDI device, the parameter printed on the panel for the

Knob will be affected. For example, the Attack Time will be affected,

when the Brightness (74) is assigned to the Knob 1 and the Attack

Time (73) is assigned to the Knob 3, and then the message for the

Brightness (74) are transmitted from an external device.

• Both data assigned to the Knob using the ASSIGN CTRL NO

function and Knob data which parameter name is printed on the

panel are sent to the internal tone generator when turning the

Knob. For example, both Brightness (74) and Attack Time will be

affected when the Brightness (74) is assigned to the Knob 1 and the

Knob 1 is turned.

NOTE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CS1X Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CS1X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info