Bedienungsanleitung Yamaha CS1X (Seite 49 von 64) (Englisch)

48730

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

The diagram below shows the signal flow of the three effects when the

CS1x is in Multi Play mode and the Variation effect is designated as a

System effect.

Each of the 16 Parts has a Dry send !level which controls the amount of

original signal for each Part (page 38). Reverb send ", Chorus send #,

and Variation send $levels control the amount of effect applied to each

Part, determined by the Multi Edit EFFECT REV SEND, CHO SEND and VARI

SEND parameters (between 0~127), respectively (page 38). Reverb return

%, Chorus return &and Variation return 'levels can also be controlled

to determine the amount of each effect applied (page 38).

The Send Chorus to Reverb (level is sent from the Chorus effect to the

Reverb effect (page 38). The Send Variation to Reverb )and Send

Variation to Chorus *levels are sent from the Variation effect to the

Reverb and Chorus effects, respectively (page 38). These three

parameters let you make series and parallel effect configurations which

provide enormous sound enhancement flexibility.

If you select Effect Off in the Variation Type menu, the

Layers which have the VARI SEND function set to ON will not sound.

When you don't want to use the Variation Effect on the Layers, set the

VARI TYPE to Thru.

NOTE

Part 1

Part 2

Part 16

Rev

Cho

Vari

Rev Return Level

Cho Return

Vari Return

Vari to Rev

Vari to Cho

Cho to Rev

Dry Send

Rev Send Cho Send Vari Send

Vari Send, Cho Send, Rev Send = 0~127

•XG effect set to System

Out

"#$

(

)

Part 1

Part 2

Part 3

Part 16

wet/dry

MULTI

Send Cho to Rev

Rev Return Level

Cho Return Level

Cho SendRev Send

Rev

•XG effect set to Insertion

•Part 3 VARI SEND set to ON

Cho

Out

Vari

Reverb and Chorus send levels for Layers with the Variation

Send On/Off switch set to ON are determined by the highest

numbered Layer. For example, if Layers 1, 2 and 3 are switched on,

then the Reverb and Chorus send level for Layer 3 will determine the

amount of effect applied to each Layer.

In Performance mode effect send levels for Parts 5~16 (as

well as Layers 1~4) can be controlled by an external MIDI sequencer.

The Variation effect cannot be applied to Parts 5~16.

Multi Play Mode

The diagram below shows the signal flow of the three effects when the

CS1x is in Multi Play mode and the Variation effect is designated as an

Insertion effect.

In Multi Play mode the various effect settings can be

controlled by MIDI system exclusive Parameter Change messages

(received from an external sequencer or computer). The illustrations at

right show the Reverb, Chorus and Variation send parameters which

can be controlled from the CS1x panel. For details about the others,

refer to each page number as listed in the following explanation.

When the CS1x is in Multi Play mode, the Variation Effect is

automatically reset as an Insertion Effect. If you want to set the

Variation Effect as a System Effect, you need to send a parameter

change message to the CS1x from an external MIDI sequencer.

The Variation (Insertion) effect can be applied to any one of the 16 Parts at

a time, designated by switching the Multi Edit EFFECT VARI SEND

parameter to ON (page 38). The ratio of Variation effect (wet) signal to

original (dry) signal is determined by the wet/dry balance !, which in

turn controls the amount of Variation effect signal applied to the Part

(page 38).

Although only one Part at a time can have the Variation effect applied to

it, all Parts, including the Part with Variation effect, can have Reverb and

Chorus applied, determined by the Reverb send "and Chorus send #

level settings (between 0~127) of the Multi Edit EFFECT REV SEND and CHO

SEND parameters, respectively (page 38). Reverb return $and Chorus

return %levels can also be controlled to determine the amount of each

effect applied. The Send Chorus to Reverb &level from the Chorus effect

to the Reverb effect can also be controlled in a series, if you assign it to

the ASSIGN 1 knob (page 26); in this case, the Chorus return %level

should be set to "0".

NOTE

Layer 1 on

PERFORMANCE

Layer 2 on

Layer 3 on

Layer 4 off

wet/dry

Part 5

Part 16

Cho

Rev

Cho Send

Rev Send

Out

Knobl (Cho to Rev)

(for each layer/part)

Vari

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CS1X Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CS1X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info