Bedienungsanleitung Yamaha CS2X (Seite 10 von 84) (Englisch)

48728

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

Getting Started

1 MIDI terminals

The MIDI terminals let you connect external MIDI devices such as a

sampler, drum machine, sequencer, or computer using MIDI cables.

MIDI IN is for input of MIDI note and other performance-related data, as

well as bulk data dumps from another CS2x or MIDI data storage device.

MIDI OUT is for output of MIDI note and other performance-related data,

as well as for bulk data dumps to another CS2x or MIDI data storage

device. MIDI THRU is for “daisy chain” connection of multiple MIDI

instruments, as the MIDI data received at MIDI IN is passed along

unaffected to MIDI THRU. (NOTE: Set HOST SELECT to “MIDI” when

using the MIDI terminals.)

2 HOST SELECT switch

This switch lets you designate the type of host computer, either PC1, PC2,

Mac, or MIDI (page 13). (NOTE: When a host computer is not connected,

set HOST SELECT to “MIDI” for normal MIDI transmission and reception.)

3 TO HOST terminal

This terminal lets you connect the CS2x directly to a host computer which

does not have a MIDI interface (page 13).

4 INPUT jack

This jack lets you connect an external audio source (such as a sampler,

CD player, etc.) directly to the CS2x using either a stereo or mono mini

plug. The incoming audio signals are combined and output at the CS2x's

OUTPUT terminals, thus eliminating the need for an external mixer. To

control the relative balance of the signals, use the external device's

output volume control and the CS2x's panel edit PERFORM LEVEL

parameter (Performance mode; page 44) or VOLUME parameter (Multi

Play mode, page 59).

5 FOOTSWITCH jack

By connecting an optional Yamaha FC4 or FC5 footswitch to this jack you

can control hold on/off, portamento on/off and other parameters,

determined by the ASSIGN CTRL NO (Assign Control Change Number)

setting in Utility mode (page 64).

6 FOOT CONTROLLER jack

By connecting an optional Yamaha FC7 or FC9 foot controller to this jack

you can control filter modulation, filter cutoff, and the Variation effect

(page 12), as well as the Control Change Number (page 64). You can also

use it for “sound morphing” between Scenes when the SCENE CONTROL

function is active (page 25).

7 FOOT VOLUME jack

By connecting an optional Yamaha FC7 or FC9 foot controller to this jack

you can regulate overall volume by foot.

8 STANDBY/ON switch

This switch is for turning the power of the CS2x on and off (page 14).

9 DC IN terminal

This terminal is for connection of the supplied Yamaha PA-3B Power

Adaptor. (CAUTION: Do not attempt to use an AC adaptor other than the

Yamaha PA-3B or equivalent, since the use of an incompatible adaptor

may cause irreparable damage to the CS2x, and may even pose a serious

shock hazard.)

) OUTPUT jacks

The stereo OUTPUT jacks let you connect the CS2x to an external stereo

amplifier/speaker system. When using a mono system, use the L/MONO

jack. (page 11.)

! PHONES jack

This jack lets you connect a set of stereo headphones for private listening

(page 11).

Rear Panel

PHONES

L/MONO

OUTPUT

FOOT

VOLUME

FOOT

CONTROLLER

FOOT

SWITCH

ASSIGNABLE

INPUT

TO HOST

HOST SELECT

PC-

2 PC-1

MIDI Mac

INOUT

MIDI

THRU

STANDBY

cCS2x_Basic 2/3/99 2:00 PM Page 10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CS2X Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CS2X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info