Bedienungsanleitung Yamaha CS2X (Seite 50 von 84) (Englisch)

48728

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

Feature Reference

Performance Mode

Layer Edit 2

The functions in this menu include AEG (Amplitude

Envelope Generator) and LFO (Low Frequency Oscillator)

parameters, which are essential for creating each Layer

voice. The parameters can be set for each individual Layer

in a Performance.

■ AEG (Amplitude Envelope Generator)

This sets the parameters for the Amplitude Envelope

Generator. The AEG lets you shape how the volume level of

each Layer voice changes over time, from when a key is

struck, then released, and how the sound decays. There are

four parameters: ATK TIME (Attack Time), DCY TIME (Decay

Time), SUS LEVEL (Sustain Level) and REL TIME (Release

Time).

Each musical instrument has a unique envelope curve which plays

an important role in determining its sound characteristics. The AEG

simulates the change of the volume envelope curve over time.

Depending on the voice selected, changing certain parameters may

not produce a noticeable effect.

ATK TIME (Attack Time): Determines the time required for a

sound to reach its maximum volume level when a note is

played.

DCY TIME (Decay Time): Determines the time required for

a sound to reach its Sustain Level from a maximum volume

level while the key is held.

SUS LEVEL (Sustain Level): Sets the Sustain Level. The

volume will be maintained at this level for as long as the key

is held.

Attack Time Decay Time

Sustain Level Release Time

PERFORMANCE

MULTI

DEMO

STORE

UTILITY

SYSTEM

P BEND

RANGE

TYPE

ARPEGGIATOR

TEMPO

PMOD

SUB

DIVIDE

PERFORM

LEVEL

FMOD

CUTOFF

REV

TYPE

CHO

TYPE

VARI

TYPE

VARI

PARAM

PERFORM

NAME

VARI

DATA

ASSIGN1

PARAM

PORTA

SWITCH

TIME

EFFECT

VARI

CUTOFF

FMOD

COMMON

ASSIGN

MIDI

BANK

PROGRAM

ATK

TIME

ATK

TIME

DCY

TIME

DCY

TIME

FEG

AEG

SUS

LEVEL

SUS

LEVEL

VOLUME

PAN

REL

TIME

REL

TIME

AMOD PMOD

INIT

LEVEL

ATK

TIME

REV

SEND

EFFECT

CHO

SEND

VARI

SEND

ATK

LEVEL

FMOD

LFO

PEG

DCY

TIME

WAVE

FILTER

CUTOFF

REZ

SPEED

REL

TIME

REL

LEVEL

PHASE

INIT

POLY

MONO

ASSIGN

DATAPARAMDEPTHOFFSET

VEL

LIMIT

HIGH

LIMIT

HIGH

LIMIT

LOW

LIMIT

LOW

NOTE

TUNE

NOTE

SFT

DETUNE

LAYER

Although parameters marked with an asterisk (*) cannot be

modified, you can assign them to the ASSIGN 2 knob.

You can also select each parameter by inputting the

corresponding number using the NUMERIC KEYPAD (0 ~ 9)

and [ENTER].

4. Press PARAM [UP/DOWN] to move the arrow cursor

to the Sensitivity area in the LCD.

5. Press DATA [UP/DOWN] to set the knob sensitivity.

Settings:

Parameters can be set between -32 and +32 for assignment numbers 1

through 4.

As an example, say you have selected the Volume parameter and set

the knob sensitivity to the positive value “+32”. The volume is “0”

when the knob is turned counter-clockwise to the far left, and “127”

when the knob is turned clockwise to the far right.

If the knob sensitivity is set to the negative value “-32” the volume

is “127” when the knob is turned to the far left and “0” when the

knob is turned to the far right. If the sensitivity value is low, the

control range of the knob will be narrowed and limited.

6. Repeat the above steps to set a different Parameter Type

and knob Sensitivity value to each of the four

assignment numbers.

When the PARAM screen is displayed, you can select the Parameter

Type or change the knob Sensitivity using the ASSIGN 1/DATA knob

or the NUMERIC KEYPAD (0 ~ 9) and [ENTER].

NO. LCD

0 off

1 Volume (page 54)

2 NoteShift (page 48)

3 Detune (page 48)

4 Pan (page 54)

5 ChorusSend (page 55)

6 ReverbSend (page 55)

7 *Pitch (Oscillator Pitch)

8 VelSnsDpth (Velocity Sensitivity Depth) (page 49)

9 VelSnsOfst (Velocity Sensitivity Offset) (page 49)

10 Cutoff (Filter Cuttoff Frequency) (page 55)

11 Resonance (page 55)

12 AEGAtkTime (AEG Attack Time) (page 50)

13 AEGDcyTime (AEG Decay Time) (page 50)

14 AEGSusLvl (AEG Sustain Level) (page 50)

15 AEGRelTime (AEG Release Time) (page 51)

16 LFOSpeed (LFO Speed) (page 51)

17 LFOAMod (LFO Amplitude Modulation Depth) (page 51)

18 LFOPMod (LFO Pitch Modulation Depth) (page 51)

19 LFOFMod (LFO Filter Modulation Depth) (page 51)

20 FEGAtkTime (FEG Attack Time) (page 53)

21 FEGDcyTime (FEG Decay Time) (page 53)

22 FEGSusLvl (FEG Sustain Level) (page 53)

23 FEGRelTime (FEG Release Time) (page 53)

24 PEGInitLvl (PEG Initial Level) (page 53)

25 PEGAtkTime (PEG Attack Time) (page 53)

26 PEGAtkLvl (PEG Attack Level) (page 53)

27 PEGDcyTime (PEG Decay Time) (page 53)

28 PEGRelTime (PEG Release Time) (page 53)

29 PEGRelLvl (PEG Release Level) (page 53)

cCS2x_Ref 12/10/98 5:12 PM Page 50

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CS2X Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CS2X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info