Bedienungsanleitung Yamaha CS2X (Seite 65 von 84) (Englisch)

48728

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

Feature Reference

Utility Mode

Press a [SCENE] button to display the Scene Control parameters.

2. Press ASSIGN CTRL NO [UP/DOWN] button to select the Control

Change Number and Name.

3. Repeat steps 1 and 2 to assign the Control Change Numbers and

Names to each controller.

This function is especially convenient for controlling an external

MIDI device with the CS2x (see page 72).

About The SOUND CONTROL Knobs

Changes made by the SOUND CONTROL knobs can be output

as MIDI messages via the MIDI OUT terminal as assigned using

the ASSIGN CTRL NO function.

The default assignments for the SOUND CONTROL knobs as

set at the factory are as follows:

Knob 1 73: Attack Time

Knob 2 80: General Purpose 5

Knob 3 72: Release Time

Knob 4 17: General Purpose 2

Knob 5 81: General Purpose 6

Knob 6 74: Brightness

Knob 7 71: Harmonic Content

Knob 8 18: General Purpose 3

• When the CS2x receives the data assigned to each SOUND

CONTROL knob from an external MIDI device, the

parameter printed on the panel for the knob will be affected.

For example, when the message for Brightness (74) is

received from an external device, the Attack Time will be

affected when the Brightness (74) is assigned to Knob 1 and

the Attack Time (73) is assigned to Knob 3.

• Both the data assigned to the Knob using the ASSIGN CTRL

NO function and parameter data as printed on the panel for

the Knob are sent to the internal tone generator when turning

the Knob. For example, when you turn Knob 1, both

Brightness (74) and Attack Time will be affected when

Brightness (74) is assigned to Knob 1.

The table below lists the Control Change Numbers and

Names that can be assigned to the various controllers.

General Purpose: With the CS2x, General Purpose 1 is for FC, 2 is

for Knob 4 (ASSIGN 1/DATA), 3 is for Knob 8 (ASSIGN 2), 4 is for

no setting, 5 is for Knob 2 (DECAY), 6 is for Knob 5 (HPF CUTOFF)

and 7 and 8 are for no setting.

Assigning The Controllers

1. Move the panel controller (i.e. a SOUND CONTROL knob or the

MODULATION wheel) to which the Control Change Number is to

be assigned. The parameters for the controller will appear in the

LCD.

Control Change Number Name LCD

1 Modulation Depth ModDpth

5 Portament Time PortaTm

6 Data Entry MSB DataMSB

7 Main Volume MainVol

10 Panpot Panpot

11 Expression Expres.

16 General purpose1 Generl1

17 General purpose2 Generl2

18 General purpose3 Generl3

19 General purpose4 Generl4

38 Data Entry LSB DataLSB

64 Hold 1(Damper/Sustain) Hold1

65 Portament Switch PortaSW

66 Sostenute Sostnut

67 Soft Pedal Soft

71 Harmonic Contents Harmonic

72 Release Time RelTime

73 Attack Time AtkTime

74 Brightness Bright.

80 General Purpose 5 Generl5

81 General Purpose 6 Generl6

82 General Purpose 7 Generl7

83 General Purpose 8 Generl8

84 Portament Control PortaCt

91 Reverb Depth Reverb

93 Chorus Depth Chorus

94 Variation Depth Vari

Others ------- -------

Assignable Control Change Numbers and Names

cCS2x_Ref 12/10/98 5:12 PM Page 65

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CS2X Seite 65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CS2X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info