Bedienungsanleitung Yamaha CS2X (Seite 73 von 84) (Englisch)

48728

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

Appendix

1.2.8 General Purpose 1, 2, 3, 4, 5, 6, 7, 8

(Control #016, 017, 018, 019, 080, 081, 082, 083)

Control #016 are messages which are transmitted by operating the

connected Foot Controller, used to control specific parameter such

as voice parameters and Variation effect parameters. Control #017

and Control #018 are messages which are transmitted by operating

the ASSIGN1 and ASSIGN2 knobs, respectively. Control #080 and

#081 are transmitted by operating the DECAY and HPF Cutoff

Knobs, respectively. Control #019, #082 and #083 are undefined.

1.2.9 Hold1 (Control #064)

Messages which control sustain on/off.

Setting the value between 64 - 127 turns the sustain on, between 0

- 63 turns the sustain off.

1.2.10 Portamento Switch (Control #065)

Messages which control portamento on/off.

Setting the value between 64 -127 turns the portamento on,

between 0 - 63 turns the portamento off.

1.2.11 Sostenuto (Control #066)

Messages which control sostenuto on/off.

Holding specific notes and then pressing and holding the sostenuto

pedal will sustain those notes as you play subsequent notes, until

the pedal is released.

Setting the value between 64 -127 turns the sostenuto on, between

0 - 63 turns the sostenuto off.

1.2.12 Soft Pedal (Control #067)

Messages which control soft pedal on/off.

Notes played while holding the soft pedal will be dampened.

Setting the value between 64 -127 turns the soft pedal on, between

0 - 63 turns the soft pedal off.

1.2.13 Harmonic Content (Control #071)

Messages which adjust the filter resonance set for each voice.

The value set here is an offset value which will be added to or

subtracted from the voice data.

Higher values will result in a more characteristic, resonant sound.

Depending on the voice, the effective range may be narrower than

the range available for adjustment.

1.2.14 Release Time (Control #072)

Messages which adjust the EG release time set for each voice.

The value set here is an offset value which will be added to or

subtracted from the voice data.

1.2.15 Attack Time (Control #073)

Messages which adjust the EG attack time set for each voice.

The value set here is an offset value which will be added to or

subtracted from the voice data.

1.2.16 Brightness (Control #074)

Messages which adjust the filter cutoff frequency set for each voice.

The value set here is an offset value which will be added to or

subtracted from the voice data.

Lower values will result in a softer sound.

Depending on the voice, the effective range may be narrower than

the range available for adjustment.

1.2.2 Modulation (Control #001)

Messages which control vibrato depth using the Modulation Wheel.

Setting the value to 127 produces maximum vibrato and 0 results

in vibrato off.

1.2.3 Portamento Time (Control #005)

Messages which control the duration of portamento, or a

continuous pitch glide between successively played notes.

When the parameter 1.2.10 Portamento Switch is set to on, the

value set here can adjust the speed of pitch change.

Setting the value to 127 produces maximum portamento time and

0 results in minimum portamento time.

1.2.4 Data Entry MSB (Control #006)

Data Entry LSB (Control #038)

Messages which set the value for the parameter specified by

1.2.23RPN MSB/LSB and 1.2.22 NRPN MSB/LSB.

Parameter value is determined by combining MSB and LSB.

1.2.5 Main Volume (Control #007)

Messages which control the volume of each Part.

Setting the value to 127 produces maximum volume and 0 results

in volume off.

The messages 007 (Main Volume) or 011 (Expression) will be

transmitted using an optional controller connected to the FOOT

VOLUME jack on the rear panel if an appropriate setting is selected

in the Assign Control Number section in Utility mode.

1.2.6 Pan (Control #010)

Messages which control the stereo panning position of each Part

(for stereo output).

Setting the value to 127 positions the sound to the far right and 0

positions the sound to the far left.

1.2.7 Expression (Control #011)

Messages which control intonation expression of each Part during

performance.

Setting the value to 127 produces maximum volume and 0 results

in volume off.

The messages 007 (Main Volume) or 011 (Expression) will be

transmitted using an optional controller connected to the FOOT

VOLUME jack on the rear panel if an appropriate setting is selected

in the Assign Control Number section in Utility mode.

cCS2x_App 12/10/98 5:15 PM Page 73

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CS2X Seite 73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CS2X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info