Bedienungsanleitung Yamaha CS6R (Seite 56 von 196) (Englisch)

48734

Zoom out

Zoom in

Vorherige Seite

1/196

Nächste Seite

Basics

Section

!In Phrase Clip Edit Mode, use the [PAGE] knob

to switch to the OSC Asgn screen. Normally

you would assign the Phrase Clip to a note on

the keyboard (Clip Key) here. However, since

we have already assigned it to note C1 in step

3 the Phrase Clip name and number ([Clip

001]) will be displayed when you press note C1

on the keyboard or use Knob [A] to call up C1.

When you press C1 to assign a Clip Key, the

Phrase Clip will be played back.

Since it is somewhat inflexible to assign the

Phrase Clip to just C1, we will also assign it to

the white notes from D1 to C2. Select each

respective notes by pressing it on the keyboard

or by using Knob [A], and use Knob [B] to

assign [Clip 001] to each.

At the same screen, use Knob [1] to select a

Variation.

A Variation refers to the method by which the

Phrase Clip (including its loop points and other

parameters) is played back. Using a Variation, each

Phrase Clip can have up to eight different loop

points. For example, when applied to the drum

pattern Phrase Clip recorded earlier, Variations can

be used to create a 1-bar loop pattern, a reversed

pattern and other different playback styles.

You have assigned the same Phrase Clip ([Clip

001]) to the white notes between C1 and C2.

Now you can assign a different Variation to each

of the notes. Select each respective note by

pressing it on the keyboard or by using Knob

[A], and use Knob [1] to assign a different

Variation number (1 to 8) to each.

At this stage, the Variations themselves have not

been set so Variations 1 to 8 will all play the

Phrase Clip back in the same way. However,

once you have set up all the Variations, the same

Phrase Clip can be played back differently for

each white note between C1 and C2.

SHIFT PAGE

PART

ELEMENT

DATAA B C 1 2

OSCíAsgn) Number Variation [ENTER]

Key= C 1 1[Clip 001] 1 to Edit

SHIFT PAGE

PART

ELEMENT

DATAA B C 1 2

OSCíAsgn) Number Variation [ENTER]

Key= C 2 1[Clip 001] 1 to Edit

SHIFT PAGE

PART

ELEMENT

DATAA B C 1 2

OSCíAsgn) Number Variation [ENTER]

Key= C 1 1[Clip 001] 1 to Edit

7Press the [ENTER] key and the Recording

Standby state is entered. You will see the

“Waiting for trigger...” message.

8Recording will begin when you press the

respective note on the keyboard. Press the note

and let the drum pattern play for one bar.

9Press the [EXIT] key. Recording will finish and

the “Now Working...” message will be

displayed.

The recorded Phrase Clip is now assigned to

note C1, as set in step 3. At this point, you

can audition the recorded Phrase Clip by

pressing note C1 while holding down the [REC]

key.

There may be cases where a recorded volume level

differs from one you monitored while recording. It

is an effect by the automatic level adjustment

function that corrects a recorded level for a proper

playback. In these cases, you can adjust a playback

level of the Clip in Phrase Clip Edit Mode. If you

want to increase the entire volume, you can use the

EQ Type parameter to set a value of “Boost12”.

If you are not satisfied with the result, you can

repeat the recording by pressing the [ENTER]

key.

)Once you exit Phrase Clip Record Mode, the

recorded Phrase Clip will automatically be

saved to memory (DRAM) with a new number

and name (Clip 001).

Here, do not exit Phrase Clip Record Mode.

Instead, press the [EDIT] key to enter Phrase

Clip Edit Mode.

Editing the Phrase Clip

Continuing from step ) above, you are now ready

to edit the Phrase Clip you have just recorded. In

Phrase Clip Edit Mode, you can assign Phrase

Clips to notes on the keyboard (between C0 and

C6) to form a Clip Kit, create loops, edit the tonal

characteristics and so on. Here, we will edit the

recorded Phrase Clip in several ways.

PCLP Rec) Source Trigger [EXIT]

<< Waiting for Trigger... >> toStop

DEC

NO INC

YES

EXIT ENTER

BYPASS

MASTER

KEYBOARD

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CS6R Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CS6R

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info