Bedienungsanleitung Yamaha CS6R (Seite 67 von 196) (Englisch)

48734

Zoom out

Zoom in

Vorherige Seite

1/196

Nächste Seite

Basics

Section

Using as a Master Keyboard

(Performance Mode)

2Select “Common” using the Knob [A], then

open the GEN M. Kbd (General Master

Keyboard) screen using the [PAGE] knob.

Turning the [PAGE] knob while holding down the

[SHIFT] key enables you to scroll though

parameters in the Menu screens (page 121).

3Select “split” for the Mode parameter using the

Knob [B].

If Master Keyboard Mode is deactivated (without

the [MASTER KEYBOARD] key pressed), the

Mode parameter value will be shown in brackets

(like “(split)”).

4Select the value (split point) for the Point

parameter using the Knob [2], which determines

the key note that divide the keyboard into two

sections. Select “C3” for this example.

You can specify the split point by directly pressing

a specific key on the keyboard while holding

down the [SHIFT] key. In this example, press C3

while holding down the [SHIFT] key.

5Specify MIDI transmit channels respectively for

the lower and upper key ranges using the Knob

[C] (lower) and the Knob [1] (upper). These

settings can make MIDI-channel-based separate

controls of the internal tone generator or an

external MIDI devices from the keyboard, such

as using different Voice tones in the lower and

upper key ranges.

Select “ch01” for “Lower” and “ch02” for

“Upper” for this example.

You can also use the PROGRAM/PART [1] to

[16] keys to select MIDI channels for the Lower

and Upper ranges (Page 123).

6Select a Part for the lower range using the Knob

[A]. For this example, select “Part01”.

7Turn the [PAGE] knob and open the MIX Vce

(Mix Voice) screen to select a Voice for

Arpeggiator performance.

8Turn the [PAGE] knob and open the LYR Mode

(Layer Mode) screen. Set “on” for “Arp”

(Arpeggio switch). Select “1” for “RcvCh”

(MIDI Receive Channel).

LYRíMode) Mode Arp Layer RcvCh

Part01 poly on off 1

MIXíVce) Memory Number Ctgry Search

Part01 PRE1:128(H16)[Pf:GrandPiano]

GENíM.Kbd) Mode Lower Upper Point

Common split ch01 ch02 C 3

As previously explained, your Synthesizer

provides several convenient features that you can

make use of in a live show or the like. Here we

introduce some examples to combine those

features to meet your specific purposes.

The CS6x has special settings in Performance Mode

so that you can use the instrument as MIDI master

keyboard. You can activate the function (enable those

special settings) when you press the [MASTER

KEYBOARD] key on the panel (its LED will light).

Now your instrument can send performance on the

keyboard to an external tone generator, as well as the

internal tone generator, according to the master

keyboard settings in Performance Mode. If you divide

the keyboard into several (up to four) key ranges and

assign separate MIDI transmit channels, the keyboard

can control multiple parts (channels) from the

internal tone generator and external MIDI devices of

those channels at the same time.

There are three Master Keyboard Modes (how to

make key ranges) available: Split, 4 Zones, and Layer.

You can learn these Master Keyboard Modes and their

functional differences in the following examples.

Split

The illustration below shows an example of a Split

configuration. Split is a typical setting to divide a

keyboard into two key ranges (lower and upper) by

splitting at a specific key note (split point). The

following example is to split the keyboard at C3

note, enabling the lower range for automatic

performance with Arpeggiator and the upper range

for manual solo performance. You can make this

configuration in the following steps.

Edit and prepare Voices for Arpeggiator and manual

play in Voice Edit Mode before you set up a Split

setting in the following procedure (page 78).

1Press the [PERFORM] key, followed by the

[EDIT] key (each LED will light) to enter

Performance Edit Mode. Then, press the

[MASTER KEYBOARD] key to activate Master

Keyboard Mode (its LED will light).

Ch1

Part1

Performance

by Arpeggiator

Ch2

Part2

Manual play

Lower Upper

Split point

(C3)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CS6R Seite 67

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CS6R

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info