Bedienungsanleitung Yamaha CS6R (Seite 70 von 196) (Englisch)

48734

Zoom out

Zoom in

Vorherige Seite

1/196

Nächste Seite

Basics

Section

You don’t need to make further settings for

Zone 4 since it is not intended for an internal

Part and has already been set to output

performance information via the MIDI OUT

connector in steps 5 to ). The key range of

Zone 4 matches to that of Zone 3 so that solo

performance made in that range will be sent on

MIDI channels 3 (from Zone 3) and 4 (from

Zone 4) via MIDI OUT to an external MIDI

device.

You can set additional Part settings in

Performance Edit Mode. If you have a trouble

possibly associated with these settings, such as no

sound from a specific Part, confirm any Part

settings related to volume, etc. Refer to Page 130

for more information about Part settings.

^Before exiting Performance Edit Mode, store

above settings in a Performance. For storing a

Performance, refer to Page 141.

In Performance Play Mode, recall the

Performance you have just stored. Simply

pressing the [MASTER KEYBOARD] key

activates or deactivates the 4-Zone

configuration you made above.

Layer

The illustration below shows an example of a

Layer configuration. Layer refers to two separate

Parts with a overlapped key range, enabling to

play unison with these Parts. The following

example is to play unison with Voices selected for

Part 1 and Plug-in 1 Part. You can make this

configuration in the following steps.

Before you set up a Layer configuration in the

following procedure, edit and prepare necessary

Voices for layers in associated Edit Modes.

Plug-in Voices are available only when you attach

an optional Plug-in Board (Page 108).

1Press the [PERFORM] key, followed by the

[EDIT] key (each LED will light) to enter

Performance Edit Mode. Then, press the

[MASTER KEYBOARD] key to activate Master

Keyboard Mode (its LED will light).

Layer (Upper)

Layer (Lower)

Part 1

Voice

Plug-in 1 Part

Plug-in Voice

2Select “Common” using the Knob [A], then

open the GEN M. Kbd (General Master

Keyboard) screen using the [PAGE] knob.

Turning the [PAGE] knob while holding down the

[SHIFT] key enables you to scroll though

parameters in the Menu screens (Page 121).

3Select “layer” for the Mode parameter using the

Knob [B].

If Master Keyboard Mode is deactivated (without

the [MASTER KEYBOARD] key pressed), the

Mode parameter value will be shown in brackets

(like “(layer)”).

4Use Knobs [C] and [1] to respectively set MIDI

transmit channels for the Lower and Upper

parameters. Note that Lower and Upper refer

to two Parts (Zones) to be layered together.

These channel settings can create and send

performance information on two separate

channels to the internal tone generator and an

external MIDI device via the MIDI OUT

connector. Here we set “Ch01” for “Lower”

and “Ch02” for “Upper.”

You can also use the PROGRAM/PART keys [1]

to [16] to select MIDI channels for the Lower and

Upper Parts (Page 123).

5Turn the Knob [A] and select a Part. First

select “Part01” for the Upper Part.

6Use the [PAGE] knob and open the MIX Vce

(Mix Voice) screen. Select a Voice for the

Upper Part.

7Use the [PAGE] knob to open the LYR Mode

(Layer Mode) screen. Set the Layer (Layer

Switch) to “off” and the RcvCh (MIDI

Receiving Channel) to “1.”

If other Parts’ RcvCh (MIDI receive channels) are

set to the same ones assigned to two Parts, those

Parts will also sound when you play on the

keyboard. This might be troublesome if you

simply need two layered Parts. To mute

unnecessary Parts while you play on the

keyboard, set “RcvCh” for those Parts to “off.”

You can only play Voices from layered Parts.

LYRíMode) Mode Arp Layer RcvCh

Part01 poly on off 1

MIXíVce) Memory Number Ctgry Search

Part01 PRE1:128(H16)[Pf:GrandPiano]

GENíM.Kbd) Mode Lower Upper Point

Common split ch01 ch02 C 3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CS6R Seite 70

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CS6R

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info