Bedienungsanleitung Yamaha CS6R (Seite 84 von 196) (Englisch)

48734

Zoom out

Zoom in

Vorherige Seite

1/196

Nächste Seite

Voice Mode

Common Controller

There are eight Control Settings. You can set the

Controller parameters for Portamento, the Pitch Bend

Wheel, and for each Element in a Voice.

CTL Portamento

CTL Bend (Pitch Bend)

CTL Set1 (Control Set 1)

CTL Set2 (Control Set 2)

CTL Set3 (Control Set 3)

CTL Set4 (Control Set 4)

CTL Set5 (Control Set 5)

CTL Set6 (Control Set 6)

CTL Portamento

Set the Portamento parameters. Portamento will create

a smooth transition in pitch from the first note played

to the next.

■ Switch

Switch Portamento on or off. You can also set this

using the PORTAMENTO [ON/OFF] key on the

front panel of the CS6x.

❏ Settings: off, on

■ Time

Set the pitch transition time. Higher values mean

longer transition times. You can also set this using

the [PORTAMENTO] knob on the front panel of the

CS6x.

❏ Settings: 0 ~ 127

■ Mode

Set the Portamento mode. The behavior of the

Portamento varies depending on whether Mode in

GEN Other is set to “mono” or “poly.”

❏ Settings: fingered, fulltime

If the Mode in GEN Other is set to “mono”:

fingered:

Portamento is only applied when you play legato (playing

the next note before releasing the previous one).

fulltime:

Portamento is always applied.

If the Mode in GEN Other is set to “poly”:

This is the same as for “mono,” except that Portamento is

applied to multiple notes.

CTLíPortamento) Switch Time Mode

C 1234 on 127 fulltime

CTL Bend (Pitch Bend)

You can set the amount by which the Pitch Bend

Wheel changes the pitch of the Voice.

■ Lower

Set the amount (in semitones) by which the Voice

pitch changes when the Pitch Bend Wheel is moved

downwards. For example, a value of -12 means that

the pitch of the Voice drops by up to an octave when

the Pitch Bend Wheel is moved downwards.

❏ Settings: -48 ~ 0~ +24

■ Upper

Set the amount (in semitones) by which the Voice

pitch changes when the Pitch Bend Wheel is moved

upwards. For example, a value of +12 means that

the pitch of the Voice rises by up to an octave when

the Pitch Bend Wheel is moved upwards.

❏ Settings: -48 ~ 0~ +24

CTL Set1 (Control Set 1) to CTL Set6

(Control Set 6)

The controllers and knobs on the front panel, the

keyboard, and so on can be assigned a variety of uses.

For example, keyboard aftertouch can be used to

control vibrato and the Modulation Wheel could be

used to control Resonance. They can even be used to

control parameters within individual Elements. These

control assignments are called “Control Sets.” You can

assign up to six different Control Sets per Voice. Thus

there are six screens, each for a separate controller:

CTL Set1 to CTL Set6.

Control Set 1~6 Element

Keys

Modulation Wheel

Knobs

etc.

Controller

Set 1

CTLíSet1) Src Dest EL Sw Depth

C 1234 FC(04) ELFOSpd 1234 +63

CTLíPitchBend) Lower Upper

C 1234 -12 +12

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CS6R Seite 84

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CS6R

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info