Bedienungsanleitung Yamaha CS6X (Seite 57 von 196) (Englisch)

48732

Zoom out

Zoom in

Vorherige Seite

1/196

Nächste Seite

Basics

Section

@Check that note C1 is selected, then press the

[ENTER] key. The Variation parameters for

[Clip 001] will be displayed.

To return to the previous screen, press the [EXIT]

key.

#Use Knob [A] to select the Variation number.

We will start with Variation 1.

$As explained earlier (Page 54), the Play

parameter specifies how the Phrase Clip is

played back. There are three possible settings

for this parameter, but we will select “reverse”

here. Use Knob [B] to select.

Now press note C1 on the keyboard and check

that the Phrase Clip has indeed been reversed.

Reverse playback involves the sound being played

in reverse from the End point to the Start point.

You can change the length by simply adjusting

these points. When you record a Phrase Clip, the

Start point is initially set at the beginning of the

recording and the End point at the end of the

recording.

%Press the [EXIT] key to return to the OSC Asgn

(Oscillator Assign) screen. This time, select the

D1 note and press the [ENTER] key.

SHIFT PAGE

PART

ELEMENT

DATAA B C 1 2

PCLPíVar) Play Start Loop End

(C 1) 1: reverse 0 0 236378

SHIFT PAGE

PART

ELEMENT

DATAA B C 1 2

PCLPíVar) Play Start Loop End

(C 1) 1: loop 0 0 236378

PCLPíVar) Play Start Loop End

(C 1) 1: loop 0 0 236378

DEC

NO INC

YES

EXIT ENTER

BYPASS

MASTER

KEYBOARD

^Next, select Variation 2 but set the Play

parameter to “loop” this time. When you press

note D1 at this point, the Phrase Clip is simply

played back as a loop between the Start and

End points of the recording. If you only want

one part of the Phrase Clip to be played back as

a loop, you need to set the Start/Loop/End

points. As an example, we will set a loop

exactly one bar in length.

&Use Knob [C] to set the Start point (the point at

which playback will begin when you press a

note). To create a 1-bar looped drum pattern,

you need to press note D1 and adjust the Start

point so that it matches up with the first beat

in the bar.

*Use Knob [1] to set the Loop point (the start of

the section to be looped). Since you will be

creating a loop exactly one bar in length, the

Loop point can be set to the same position as

the Start point.

(Use Knob [2] to set the End point (the end of

the section to be looped). For a 1-bar drum

pattern, you need to set the End point at the

end of the fourth beat in the bar (i.e.,

immediately before the first beat of the next

bar). Press note D1 and keep adjusting the End

point until you find the ideal point for looped

playback.

SHIFT PAGE

PART

ELEMENT

DATAA B C 1 2

PCLPíVar) Play Start Loop End

(D 1) 2: loop 119120 119120 452316

SHIFT PAGE

PART

ELEMENT

DATAA B C 1 2

PCLPíVar) Play Start Loop End

(D 1) 2: loop 119120 119120 236378

SHIFT PAGE

PART

ELEMENT

DATAA B C 1 2

PCLPíVar) Play Start Loop End

(D 1) 2: loop 119120 0 236378

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CS6X Seite 57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CS6X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info