Bedienungsanleitung Yamaha CS6X (Seite 69 von 196) (Englisch)

48732

Zoom out

Zoom in

Vorherige Seite

1/196

Nächste Seite

Basics

Section

Selecting a Zone opens the MKB Transmit

screen. You may want to select a sub screen to

set up a Zone using the [PAGE] knob. But you

first specify basic items in the MKB Transmit

screen, such as MIDI transmit channel, enabling

or disabling MIDI output to the internal tone

generator and to the MIDI OUT connector.

5Set MIDI transmit channel (TrnsCh) to “Ch01”

using the Knob [C]. Set MIDI output to the

internal tone generator (TG) and MIDI OUT

(MIDI) both to “on.”

These settings can differentiate each Zone from

one another, to internally or externally output

performance made in each Zone using a

separate MIDI channel. Finally, you will

separately control sound tones from four zones.

To do this, set “Ch01” to “Ch04” respectively to

the “TrnsCh” parameters in the MKB Transmit

screens for Zones 1 to 4. For the “TG” and

“MIDI” parameters, set both “on” for Zones 1

to 3. For Zone 4, set “off” to “TG” and “on” to

“MIDI.” You can switch between multiple

MKB Transmit screens using the Knob [A].

Some of basic settings for four zones are now

complete.

6Select “Zone01” again using the Knob [A].

Open the MKB Note screen using the [PAGE]

knob. In this screen, you can specify a key

range for a Zone.

In the MKB Note screen, you can also find other

parameters such as Note Limit, Transpose, etc.

Refer to Page 138 for more information about

these parameters.

7Set “Note Limit” (zone key range) with the

lowest and highest notes using Knobs [1]

(lowest) and [2] (highest). For “Zone01”, select

“C-2” for the lowest note and “B1” for the

highest.

8Use the Knob [A] to switch to the MKB Note

screen for “Zone02”. As in the same manner in

step 7, select “C2” for the lowest note and

“B2” for the highest.

9Use again the Knob [A] to switch to the MKB

Note screen for “Zone03”. As in the same

manner in step 7, select “C3” for the lowest

note and “G8” for the highest.

)Use the Knob one more time [A] to switch to

the MKB Note screen for “Zone04”. As in the

same manner in step 7, select “C3” for the

lowest note and “G8” for the highest. Note

that this key range setting will make a

overlapped range with Zone 3.

For detailed settings of a Zone, refer to Page 137.

MKBíNote)Octave Transpose Note Limit

Zone01 +1 +11 C-2 - G 8

!Turn the Knob [A] and select a Part for a Zone.

In this example, we select Phrase Clip Part for

Zone 1, Part 2 and Part 3 respectively for Zone

2 and Zone 3. We don’t select any internal Part

for Zone 4 since Zone 4 is set only to output

performance information via the MIDI OUT

connector. First, select Phrase Clip Part

(PartCL) for Zone 1.

You can also use the MEMORY or

PROGRAM/PART keys to select a Part for a

Zone (Page 119).

@Use the [PAGE] knob and open the MIX Kit

screen, to set up a Clip Kit for performance

using Phrase Clips.

A necessary Phrase Clip Kit should be prepared

in Phrase Clip Mode before you use in this setting

in Performance Mode.

#Use the [PAGE] knob and open the Layer Mode

(LYR Mode) screen. Set Layer Switch (Layer)

to “off,” MIDI receive channel (RcvCh) to “1.”

With settings made in steps ! to #, you can

now play Phrase Clips from the Clip Kit

assigned to “PartCL” (Phrase Clip Part) set to

MIDI receive channel 1 (RcvCh) when you

play in the key range of Zone 1.

$As in the same manner in steps ! to #, set up for

Zone 2. Turn the Knob [A] and select “Part02”.

Next go to the MIX Vce (Mix Voice) screen using

the [PAGE] knob, and select a Voice for

Arpeggiator. Then, use the [PAGE] knob to open

the LYR Mode (Layer Mode) screen and set RcvCh

(MIDI receive channel) to “2”. Also in this screen,

set the “Arp” switch to “on” for Arpeggiator

performance. Finally in the ARP Type (Arpeggio

Type) screen, set the Switch parameter to “on”.

With settings made here, you can now play with

Arpeggiator using a Voice assigned to “Part02”

set to MIDI receive channel 2 (RcvCh) when

you play in the key range of Zone 2.

%As in the same manner in steps ! to #, set up

for Zone 3. Turn the Knob [A] and select

“Part03”. Next go to the MIX Vce (Mix Voice)

screen using the [PAGE] knob, and select a

Voice for manual solo performance. Then, use

the [PAGE] knob to open the LYR Mode (Layer

Mode) screen and set the RcvCh (MIDI receive

channel) to “3”.

With settings made here, you can now play solo

using a Voice assigned to “Part03” set to MIDI

receive channel 3 (RcvCh) when you play in

the key range of Zone 3.

LYRíMode) Arp Layer RcvCh

PartCL on off 1

MIXíKit) Number 

PartCL 001(A01)[Dr:Clip Kit]

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CS6X Seite 69

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CS6X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info