Bedienungsanleitung Yamaha CS6X (Seite 73 von 196) (Englisch)

48732

Zoom out

Zoom in

Vorherige Seite

1/196

Nächste Seite

Basics

Section

Performing Live while

Playing Back a Song File

While playing back the song file with the piano,

bass and drum Parts assigned earlier, you can set

up the Performance so that you can also play

another Part live.

This is the same as the Performance created

earlier, but with the addition of another Part for

live playback. Regarding settings, the important

points are as follows.

• In the Performance created earlier, Parts 2, 3

and 10 were being used. As an example, we

will now assign another Part (Part 1) to a solo-

type Voice.

• At the LYR Mode screen, set the Layer

parameter for Part 1 to “on,” and make sure it

is set to “off” for Parts 2, 3 and 10.

If you want to manually play multiple (up to

four) Parts using some Voices from Parts 4 to 9,

11 to 16 and Plug-in Parts, set those Parts’ Layer

Switch parameters to “on.”

• At the GEN MIDI screen, set the LayerCh

(Layer Channel) parameter to BasicCh.

The Voice for Part 1 can now be played live

using the keyboard.

Using the A/D Input Part

If you have external sources (such as a microphone

or other audio equipment) connected to the

synthesizer’s A/D INPUT jack, you can use them

as Parts in a Performance.

Continuing with our example, you can add another

Part for vocals by assigning the A/D Input Part.

Therefore, while the song is playing back the piano,

bass and drums, you simultaneously play a solo live

and sing into the microphone. Effects such as

reverb can be added to the A/D Input Part (Pages

130 and 137), so you can assign an effect suited to

the vocals for the song. These effect settings will

also be saved with the Performance.

Track 1

Track 2

Track 3

Piano

Bass

Drums

Transmit Ch. 2

Transmit Ch. 3

Transmit Ch. 10

Part 1

Part 2

Part 3

Solo-type Voice

Piano-type Voice

Bass-type Voice

Layer=on

Receive Ch. 2

Receive Ch. 3

Part 10

Drum Voice Receive Ch. 10

Song File

Performance

Playback using

keyboard

* You need to set the receive channel to control the A/D

Input Part parameters via MIDI. However, this is not

vital in this example.

Regarding settings, the important points are as

follows.

• Switch to the PartAD (A/D Input Part)

parameters and set the external input source

and template at the MIX Template screen.

There are 13 templates available already with a

variety of gain and effects settings for you to

select from according to the input source. Here,

we will be using the A/D Input Part for vocals

so let’s set the Src (Source) parameter to “mic”

and the Number (Template Number) parameter

to “Karaoke1.”

If you choose the wrong type of input source, you

may possibly damage your hearing and/or any

connected audio equipment. Make sure you set this

parameter correctly.

• Turn the [GAIN] knob (Page 11) all the way

down, then connect a microphone to the A/D

INPUT jack (MIC/LINE2 jack).

• Turn the [GAIN] knob back slowly while

singing/talking into the microphone until you

reach an ideal volume level.

There are other settings for controlling the A/D

Input Part via MIDI. Details are given on Page 132.

When you play a song file bearing the XG/GM logo

(available in the market), you may want to install an

optional XG Plug-in Board on the instrument, to enjoy

a best playback quality with a wide variety of Voices

and Effects. Note that you can install an additional XG

Plug-in Board to double polyphonic notes and Effects.

In such cases, you do not only enjoy the playback of a

song, but also can mute a specific Part from the song

file for a “minus-one” setting, which is convenient for

practice of solo performance or karaoke.

If you install the optional Effect Plug-in Board

(PLG100-VH), you can create harmonies of up to

three notes for your vocals. By assigning the

harmony channel to the keyboard’s MIDI transmit

channel, you can create vocoder-like effects. Or you

could play back a harmony line using a sequencer to

create a backing chorus for your vocals.

MIXíTemplate)Src Number 

PartAD mic ≥05[Karaoke1 ]

Track 1

Track 2

Track 3

Piano

Bass

Drums

Transmit Ch. 2

Transmit Ch. 3

Transmit Ch. 10

Part 1

Part 2

Part 3

Solo-type Voice

Piano-type Voice

Bass-type Voice

Layer=on

Receive Ch. 2

Receive Ch. 3

Part 10

Drum Voice Receive Ch. 10

A/D Input

Part

Source (mic)

Template (karaoke1)

Song File

Performance

External

mic input

Playback using

keyboard

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CS6X Seite 73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CS6X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info