Bedienungsanleitung Yamaha CVP-107 (Seite 22 von 235) (Englisch)

593661

Zoom out

Zoom in

Vorherige Seite

1/235

Nächste Seite

CVP-109/107/105/700

EXIT DIRECT ACCESS

Using the LCD Display Controls

The last function we need to discuss is Direct Access. The [DIRECT AC-

CESS] button lets you jump directly to pages with particularly useful settings.

When you press [DIRECT ACCESS], the “Press a button to display

corresponding settings” message will appear in the LCD display.

Using the Direct Access Function

This message will remain onscreen for about three seconds. Press the

button corresponding to the settings you want to display before the mes-

sage disappears.

Here is a list of pages you can access with Direct Access:

You can also press an appropriate button

while holding down the [DIRECT AC-

CESS] button.

● A Word about Messages

For ease of operation, the Clavinova displays various messages (like the message displayed by the Direct

Access function as described above) that either prompt you to the next operation, ask for confirmation, or in-

form you that the last operation is not effective, valid, or appropriate. When such messages appear, follow the

instructions as shown. For details about each message, please refer to the “Messages” section on page 221.

● Saving Your Changes

Now that you’ve started learning how to change the Clavinova’s settings, you may be wondering whether it

will remember the changes you’ve made even after you’ve turned the power off. The answer is yes — but you

need to tell it which settings you want it to remember.

By default, the Clavinova will not remember most of your setting changes. You have two ways to tell it which

settings you want to remember:

• You can register your settings with the Registration function (page 108). Once you have registered your

settings, you can restore them at any time by pressing a couple of buttons.

•

You can instruct the Clavinova to remember certain settings when the power is off, and recall these settings

when you turn the power back on. To do this, you need to change the settings of the Backup function (page 206).

(1)

When RIGHT1 VOICE is selected in

the main display.

(2)

When RIGHT2 VOICE is selected in

the main display.

(3)

When LEFT VOICE is selected in the

main display.

(4)

Selects whichever page was most

recently displayed.

[DIRECT ACCESS] plus: Displays: See page:

[VOCAL HARMONY]

VOCAL HARMONY (CVP-109/107/700)

176

[ACMP ASSIST] ACMP ASSIST 81

[HARMONY] HARMONY 87

[ACMP ON]

ACCOMPANIMENT MODE

[METRONOME] METRONOME 28

KEYBOARD [RIGHT1]

(1)

Any VOICE button KEYBOARD [RIGHT2]

(2)

KEYBOARD [LEFT]

(3)

[DUAL] KEYBOARD [RIGHT2] 39

[SPLIT] KEYBOARD [LEFT] 42

[REVERB]

(4)

NATURAL REVERB (CVP-109) 47

REVERB 47

REVERB DEPTH 50

[CHORUS] CHORUS 52

[EFFECT]

(4)

EFFECT 1 (CVP-109/107/700) 55

EFFECT 2 (CVP-109/107/700) 55

EFFECT (CVP-105) 58

[1], [2], [3], or [4] REGISTRATION [NAME] 111

[REGISTRATION]

REGISTRATION [FREEZE]

110

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CVP-107 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CVP-107

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info