Bedienungsanleitung Yamaha CVP-107 (Seite 203 von 235) (Englisch)

593661

203

Zoom out

Zoom in

Vorherige Seite

1/235

Nächste Seite

203

CVP-109/107/105/700

● Control Change Messages

CONTROL

• Settings: Tx&Rx (transmitted/received),

OFF

• Basic setting: Tx&Rx

Control change messages are used for various non-keyboard perform-

ance controls, such as the damper pedal, or for expressive control of the

sound of a connected MIDI device, such as effects and volume. For ex-

ample, the Clavinova can respond to control change messages transmit-

ted from an external MIDI sequencer. (These messages do not affect the

keyboard-played voices.) Similarly, an external MIDI device can be con-

trolled by sending control change messages from the Clavinova to that

device. (Control change messages are transmitted when operating the

damper pedal, etc., on the Clavinova.)

Set CONTROL to OFF to disable the transmission and reception of

control change messages.

The control change data recognized by the Clavinova is listed in de-

tail on page 17 in the Reference Booklet.

● System Exclusive Messages

SYS EX.

• Settings: Tx&Rx (transmitted/received),

OFF

• Basic setting: Tx&Rx

System exclusive messages are used for more advanced or detailed

MIDI control, or for controls related to specific manufacturer’s devices.

Set SYS EX. to OFF to disable the transmission and reception of sys-

tem exclusive messages.

The system exclusive data recognized by the Clavinova is listed in

detail on page 19 in the Reference Booklet.

● Start/Stop Commands

START/STOP

• Settings: Tx&Rx (transmitted/received),

OFF

• Basic setting: OFF

A device that transmits the Start/Stop command can start and stop the

rhythm or sequence data performance of a receiving device via MIDI.

For example, you can transmit the Start/Stop command from an external

MIDI sequencer to start and stop the Auto Accompaniment or song play-

back on the Clavinova. Also, an external MIDI sequencer or rhythm ma-

chine can be started and stopped by starting and stopping the Auto Ac-

companiment on the Clavinova.

Set START/STOP to ON to enable the transmission and reception of

Start/Stop commands.

FUNCTION [MIDI 3] Display — page 11

■ Receive Filter...........................................................................................................

RECEIVE FILTER

• Settings: ON, OFF (x 16)

• Basic setting: ON (x 16)

The Receive Filter function lets you prevent the Clavinova from re-

ceiving channel-specific MIDI messages — such as note data and control

changes — on certain MIDI channels.

This function is useful, for example, when you want to control some of

the Clavinova’s voices exclusively from an external sequencer, and others

using only the Clavinova’s keyboard or its built-in Auto Accompaniment

and Song mode functions. (You can also have the Clavinova ignore chan-

nels carrying messages that are intended for another instrument connected

to the Clavinova’s MIDI [THRU] terminal.)

By default, the Clavinova will receive messages on all 16 channels. Use

the following procedure to enable or disable the reception of a channel:

MIDI

201

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CVP-107 Seite 203

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CVP-107

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info