Bedienungsanleitung Yamaha CVP-107 (Seite 225 von 235) (Englisch)

593661

225

Zoom out

Zoom in

Vorherige Seite

1/235

Nächste Seite

225

CVP-109/107/105/700

This confirmation prompt appears when you execute the Vocal Harmony Memory function

of the CVP-109/107/700 (page 173) to save the current Vocal Harmony settings with the

song being edited in Song Record mode.

➾ Select YES to save the Vocal Harmony settings. Press CANCEL to return to the

RECORD EDIT 2 display without saving.

● Song Copy & Disk Copy

This message appears before you start a Song Copy or Disk Copy operation to inform you

of the number of times the disks must be exchanged. (See page 197.)

This message prompts you to insert the destination disk when copying data from one disk

to another. (See page 197.)

This message appears when you try to copy data from a 2DD disk to a 2HD disk — or vice

versa — using the Disk Copy function (page 196).

➾ Press OK to cancel the copy operation, then perform the operation again from the

beginning. Make sure the destination disk you insert is the same type (2DD or

2HD) as the source disk being copied.

This message appears if you insert the source disk when prompted to insert the destina-

tion disk while using the Disk Copy function (page 197) to copy data from one disk to an-

other.

➾ Press OK to cancel the copy operation, then execute the Disk Copy function again

from the beginning. When exchanging disks during the copy operation, be careful

not to confuse the source and destination disks.

When you first insert the destination disk while copying a song from one disk to another

disk, this message prompts you to specify the song number to which the song is to be

copied. (See page 197.)

Messages

223

● Other Record Edit

This confirmation message appears if you attempt to exit the Initial Edit function without

writing the data to disk.

➾ Press YES to save the edited data. Press NO to exit without saving. Press CANCEL

to return to the Initial Edit display without saving.

This confirmation prompt appears when you execute the Setup Memory function (page

172) to save the current panel settings with the song being edited in Song Record mode.

➾ Select YES to save the panel settings. Press CANCEL to return to the RECORD

EDIT 2 display without saving.

This message prompts you to insert the source disk when copying data from one disk to

another. (See page 197.)

This message is displayed if you insert a disk other than the specified disk (source or

destination) when prompted to exchange disks while using the Disk Copy function (page

197) to copy data from one disk to another.

➾ Press OK to cancel the copy operation, then execute the Disk Copy function again

from the beginning. When exchanging disks during the copy operation, be careful

to insert the correct disk as specified.

This message indicates that you have selected the same song number as both the source

and the destination when copying a song within a disk. (See sidebar, page 197.)

➾ Change the destination song number.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CVP-107 Seite 225

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CVP-107

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info