Bedienungsanleitung Yamaha CVP-109 (Seite 191 von 235) (Englisch)

593674

191

Zoom out

Zoom in

Vorherige Seite

1/235

Nächste Seite

191

CVP-109/107/105/700

■ Right Pedal & Bend Range (CVP-109/107/700) ...................

RIGHT PEDAL

• Settings: See table at left.

• Basic setting: Depends on main voice.

This function lets you set the right pedal of the CVP-109/107/700 to

one of two damper modes, or to control upward and downward pitch

bends.

RIGHT PEDAL Settings

Setting Description

CONT.DAMPER

The right pedal functions like a standard damper pedal.

The sustain length is increased by degrees depending on

how far the pedal is pressed.

SW.DAMPER

The right pedal functions as a damper on/off switch. The

sustain length increases when the pedal is pressed, and

returns to normal when it is let up.

BEND UP

Pressing the right pedal bends the pitch upward to the

maximum amount specified by the BEND RANGE func-

tion.

BEND DOWN

Pressing the right pedal bends the pitch downward to the

maximum amount specified by the BEND RANGE func-

tion.

CVP-105 Damper

The right pedal on the CVP-105 functions

as a damper on/off switch (see the de-

scription of the SW.DAMPER setting in

the table at left).

BEND RANGE

• Settings: 1 — 12 (semitones)

• Basic setting: Depends on main voice.

• The GLIDE RANGE function may be

displayed in place of the BEND

RANGE function when the LEFT

PEDAL function is set to one of the

GLIDE settings. To display the BEND

RANGE function, press the RIGHT

PEDAL button and select BEND UP or

BEND DOWN, if necessary.

Pedal

CVP-109/107/700

Pressing the left pedal causes the pitch to rise an amount

specified by the GLIDE RANGE function. When the pedal is

released, the pitch glides smoothly back to normal at one of

three speeds (slow, medium or fast, depending on the se-

lected setting).

Pressing the left pedal causes the pitch to drop an amount

specified by the GLIDE RANGE function. When the pedal is

released, the pitch glides smoothly back to normal at one of

three speeds (slow, medium or fast, depending on the se-

lected setting).

189

Setting Description

GLIDE UP S

GLIDE UP M

GLIDE UP F

GLIDE DOWN S

GLIDE DOWN M

GLIDE DOWN F

GLIDE RANGE

• Settings: 1 — 12 (semitones)

• Basic setting: 1

• On the CVP-109/107/700, the BEND

RANGE function may be displayed in

place of the GLIDE RANGE function

when the RIGHT PEDAL function is

set to BEND UP or BEND DOWN. To

display the GLIDE RANGE function,

press the LEFT PEDAL button and

select one of the GLIDE settings, if

necessary.

LEFT PEDAL Settings (continued)

Because the basic settings of the Right Pedal and Bend Range func-

tions depend on the current voice selection, the settings of these func-

tions may change automatically when a different voice is selected. (The

Bend Range value will change automatically only if BEND UP or BEND

DOWN is specified as the Right Pedal basic setting for the selected

voice.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CVP-109 Seite 191

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CVP-109

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info