Bedienungsanleitung Yamaha CVP-109 (Seite 216 von 235) (Englisch)

593674

216

Zoom out

Zoom in

Vorherige Seite

1/235

Nächste Seite

216

CVP-109/107/105/700

Use MIDI cables to connect the MIDI terminals on the Clavinova to

other MIDI devices. The Clavinova’s MIDI terminals are located at the left

of the unit on the underside (CVP-109/107/700) or rear panel (CVP-105).

Tone generators or other devices to be controlled by the Clavinova can

be connected to the MIDI [OUT] terminal. Devices that will control the

Clavinova should be connected to the MIDI [IN] terminal. If you have a

personal computer or sequencer that will control the Clavinova, you may

want to connect it to both the [IN] and [OUT] terminals to allow two-way

communication. In this case, any other instruments to be controlled by the

same device can be connected to the Clavinova’s MIDI [THRU] terminal.

When you use the MIDI terminals, set the [HOST SELECT] switch to

the MIDI position. The MIDI terminals will not transmit or receive data if

this switch is set to any other position.

You can set the Clavinova’s MIDI parameters using pages 9 through

12 of the FUNCTION display (see page 201 through 204).

You can use the MIDI terminals to connect your Clavinova to a

wide range of MIDI devices, including personal computers,

sequencers, tone generators, and so on. In addition, the Clavinova

features a [TO HOST] connector that lets you connect it directly

to an Apple Macintosh, IBM-PC/AT, or other compatible personal

computer without the use of a special MIDI interface.

Be sure to turn off the power when connecting or disconnecting

computers or MIDI equipment, as failing to do so can result in

damage to equipment.

Connecting MIDI Equipment

Tone Generator MIDI Sequencer

OUT

THRU

MIDI

[TO HOST] or MIDI?

• If you simply want to connect your

Clavinova to a personal computer, it

may be more convenient to use the

[TO HOST] terminal, as your computer

won’t need a special MIDI interface to

make that connection.

• The MIDI terminals are particularly

convenient when you want the

Clavinova to function as part of a more

extensive MIDI setup.

You can connect the Clavinova to an Apple Macintosh, IBM-PC/AT,

or compatible personal computer using the [TO HOST] connector, which

is located at the left of the unit on the underside (CVP-109/107/700) or

rear panel (CVP-105). If you do, be sure to set the adjacent [HOST SE-

LECT] switch to the appropriate setting for your computer model.

Connecting to a Host Computer

• Turn off both the Clavinova and the

computer before connecting the cable.

• When the Clavinova is connected to a

host computer, turn on the computer

first, then the Clavinova.

• Disconnect the cable when not using

the [TO HOST] terminal. If it is left

connected, the Clavinova may not

function properly.

HOST SELECT

MIDIMac

2PC

Data Connections

214

CAUTION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CVP-109 Seite 216

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CVP-109

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info