Bedienungsanleitung Yamaha CVP-208 (Seite 5 von 16) (Französisch)

593731

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

For Windows Users

Acrobat Reader/File Utility/YAMAHA USB MIDI Driver INSTALLATION GUIDE

Installing the driver on a Windows XP system

Start the computer.

Select [Start]

→

[Control Panel].

If the control panel appears as shown below, click “Switch to

Classic View” in the upper left of the window.

All control panels and icons will be displayed.

Go to [System]

→

[Hardware]

→

[Driver Signing]

→

[File

Signature Veriﬁcation], and check the radio button to the left

of “Ignore -Install all ﬁles, regardless of ﬁle signature” and

click [OK].

Click the [OK] button to close System Properties, and then

click “X” in the upper right of the window to close the Con-

trol Panel.

Insert the included CD-ROM into the CD-ROM drive.

Make sure the POWER switch on the MIDI instrument is set

to OFF and use the USB cable to connect the USB terminal

of the computer (or the USB hub) to the USB terminal of the

MIDI instrument. When the MIDI instrument is turned on,

the computer automatically displays the “Found New Hard-

ware Wizard.”

Check the radio button to the left of “Search for a suitable

driver for my device. (Recommended).” Click [Next].

The system starts the installation.

When the installation is complete, the system displays “Com-

pleting the Found New Hardware Wizard.” Click [Finish].

• Some computers may take about ten seconds to show this screen

after the installation is complete.

Restart the computer.

The driver has been installed.

■

File Utility

Once you’ve installed these software programs, you can use your

computer to organize data saved to the User/FD/HD drive in the

MIDI instrument.

Double-click on the “FileUtil_” folder in the CD-ROM.

The ﬁle “setup.exe” will be displayed.

Double-click on the “setup.exe” ﬁle.

The MIDI instrument Tools setup dialog will be displayed.

Execute the installation by following the on-screen direc-

tions.

For details, refer to the on-line Help or the PDF owner’s manual.

MIDI port setting

(when starting the

software as a stand-alone application)

Before setting the MIDI port on the File Utility, you should set the

MIDI port from the MIDI SETUP toolbar.

• When you start the File Utility as a plug-in application in the Open Plug-in

Technology compatible application, refer to the the PDF manual for the

respective software.

Start the File Utility.

Click the MIDI Setup button in the Toolbar called up via step

#1.

In the MIDI Setup window called up via step #2, click the

[

▼

] button at the right end of each box and make the port set-

tings as shown.

• In order for MIDI ports to be available here, you’ll need to select the rele-

vant MIDI port within File Utility. This is the port that will be used in the rel-

evant MIDI applications. For details on setting the MIDI port, refer to the

on-line manual of File Utility.

MIDI Setup button

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CVP-208 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CVP-208

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info