Bedienungsanleitung Yamaha CVP-208 (Seite 4 von 16) (Spanisch)

593731

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

For Windows Users

Acrobat Reader/File Utility/YAMAHA USB MIDI Driver INSTALLATION GUIDE

Click [Next].

The window below enables you to select the search method.

Check the radio button to the left of “Search for the best

driver for your device. (Recommended).” Click [Next].

The window that enables you to select a location in which to

install the driver appears.

Check the “CD-ROM drive” box and uncheck all other items.

Click [Next].

• The system may ask you to insert a Windows CD-ROM while it

checks for the driver. Specify the “USBdrv_” directory of the CD-

ROM drive (such as D:\USBdrv_\) and continue the installation.

• When Using the Windows 98, specify the “USBdrv_” directory of the

CD-ROM drive (such as D:\USBdrv_\) and continue the installation.

When the system detects the driver on the CD-ROM and is

ready for installation, it displays the following screen.

Make sure that the “YAMAHA USB MIDI Driver” is listed,

and click [Next]. The system starts the installation.

• The location of the driver may differ depending on the particular

model or computer platform used.

When the installation is complete, the following screen

appears. Click [Finish].

• Some computers may take about ten seconds to show this screen

after the installation is complete.

Windows 98

Windows Me

The driver has been installed.

Installing the driver on a Windows 2000 system

Start the computer and use the “Administrator” account to log

into Windows 2000.

Select [My Computer]

→

[Control Panel]

→

[System]

→

[Hardware]

→

[Driver Signing]

→

[File Signature Veriﬁca-

tion], and check the radio button to the left of “Ignore -Install

all ﬁles, regardless of ﬁle signature” and click [OK].

Insert the included CD-ROM into the CD-ROM drive.

Make sure the POWER switch on the MIDI instrument is set

to OFF and use the USB cable to connect the USB terminal

of the computer (or the USB hub) to the USB terminal of the

MIDI instrument. When the MIDI instrument is turned on,

the computer automatically displays the “Found New Hard-

ware Wizard.” Click [Next].

Check the radio button to the left of “Search for a suitable

driver for my device. (Recommended).” Click [Next].

The window that appears enables you to select a location in

which to install the driver.

Check the “CD-ROM drives” box and uncheck all other

items. Click [Next].

• The system may ask you to insert a Windows CD-ROM while it

checks for the driver. Specify the “USBdrv2k_” directory of the CD-

ROM drive (such as D:\USBdrv2k_\) and continue the installation.

When the installation is complete, the system displays “Com-

pleting the Found New Hardware Wizard.” Click [Finish].

• Some computers may take about ten seconds to show this screen

after the installation is complete.

Restart the computer.

The driver has been installed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CVP-208 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CVP-208

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info