Bedienungsanleitung Yamaha CVP-401 (Seite 189 von 226) (Englisch)

464221

189

Zoom out

Zoom in

Vorherige Seite

1/226

Nächste Seite

Using Your Instrument with Other Devices

CVP-405/403/401 Owner’s Manual

189

n The Sostenuto and Portament functions will not affect the Organ Flute Voices, even they have been assigned to the Foot Pedals.

Adjustable Parameters for Each Function

The parameters below correspond to buttons [2

π†

]–[8

π†

], and their availability depends on the selected control

type. For example, if SUSTAIN is selected as the type, the parameters “HALF PEDAL POINT,” “RIGHT 1,” “RIGHT 2”

and “LEFT” automatically appear in the display.

INTRO1–3 Same as the [INTRO I–III] buttons.

MAIN A–D Same as the [MAIN VARIATION A–D] buttons.

FILL DOWN Plays a ﬁll-in, which is automatically followed by the Main section of the button on the

immediate left.

FILL SELF Plays a ﬁll-in.

FILL BREAK Plays a break.

FILL UP Plays a ﬁll-in, which is automatically followed by the Main section of the button on the

immediate right.

ENDING1–3 Same as the [ENDING/rit. I–III] buttons.

FADE IN/OUT Switches Fade In/Fade Out function on and off.

FINGERED/FING ON BASS The pedal alternately switches between the Fingered and On Bass modes (page 103).

BASS HOLD While the pedal is pressed, the Accompaniment Style bass note will be held even if the

chord is changed during Style playback. If the ﬁngering is set to “AI FULL KEYBOARD,”

the function does not work.

PERCUSSION The pedal plays a percussion instrument selected by the [4

π†

]–[8

π†

] buttons. You

can use the keyboard to select the desired percussion instrument.

DUAL ON/OFF Same as the PART ON/OFF [DUAL (RIGHT2)] button.

SPLIT ON/OFF Same as the PART ON/OFF [SPLIT (LEFT)] button.

OTS+ Calls up the next One Touch Setting.

OTS– Calls up the previous One Touch Setting.

SONG, STYLE, MIC (CVP-405/403),

LEFT, RIGHT1, RIGHT2

These specify the part(s) that will be affected by the pedal.

HALF PEDAL POINT* (CVP-405/403) You can specify how far down you should press on the pedal until the damper or soft

effect (page 188) starts working.

DEPTH Determines the depth of the pedal effect.

UP/DOWN When GLIDE or PITCH BEND is selected, this determines whether the pitch change is

raised or lowered.

RANGE When GLIDE or PITCH BEND is selected, this determines the range of the pitch

change, in semitones. Linked to the Mixing Console → Pitch Bend Range (page 89) set-

ting.

ON SPEED When GLIDE is selected, this determines the speed of the pitch change, when the pedal

is pressed.

OFF SPEED When GLIDE is selected, this determines the speed of the pitch change, when the pedal

is released.

KIT When PERCUSSION is assigned to the pedal, all available drum kits are shown here,

letting you select the particular drum kit used for the pedal.

PERCUSSION When PERCUSSION is assigned to the pedal, all sounds of the selected drum kit (in KIT

above) are shown here. This determines the particular instrument sound assigned to the

pedal.

Using the Footswitch or Foot Controller ([AUX PEDAL] jack)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha CVP-401 Seite 189

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha CVP-401

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info